Replacement Key Recommendation for Southco Slam Latch

Question

Question:

Is the lock keyed with a R001 key?

asked by: Irv

0

Expert Reply:

There is a replacement key for the Southco Slam Latch made by Lippert. You will need replacement key # LC230012. All of the keys are the same that unlock this latch.

If you have this latch this key will work for it.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 6

Hi Steve! We do have a Snap & Zap options for your 2022 Toyota Tacoma SL5 with the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS93NQ. That said, these are still only available for preorder and we…

view full answer...

Answer 7

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…

view full answer...

Answer 8

I can definitely help you out with some replacement parts fir your older boat trailer but you're going to need to go with a whole new setup for 2 reasons; the first is that we get all the correct parts, and the second is that replacements parts…

view full answer...

Answer 9

Hi Jeff! To be perfectly honest, there is no difference between them. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED72CR comes to us already put together to fit your 2017 Toyota Tacoma, whereas the Redarc Tow-Pro Liberty Brake…

view full answer...

Answer 10

Hey Mark, the Curt hitch part #C15800 that you referenced is the highest rated hitch we offer for your 2027 Ram 4500. It is rated to tow a trailer up to 20,000 lb with a tongue weight of up to 2,700 lb.

view full answer...

Answer 11

Hey Phil! Thanks for emailing me those photos. The correct replacement for your 369545 is the Replacement Motor for Kwikee Electric RV Steps #LC379147.

view full answer...

Replacement Key Recommendation for Southco Slam Latch

Product Page this Question was Asked From

Continue Researching