Replacement Passenger Side Glass for CIPA Towing Mirrors CM11300 on a 2016 Toyota Sequoia

Question

Question:

Bought CIPA extended mirrors for 2016 Sequoia. Right passenger glass broke. What is the correct item number for the replacement glass of the CM11300 mirror?

asked by: Lynne

0

Expert Reply:

The correct replacement glass for the passenger side mirror for the CIPA towing mirrors # CM11300 is # 10802GL.

If you needed the driver's side at some point the part number for this is # 10801GL.

I have linked the above mentioned parts to this page for your viewing and purchasing convenience.

expert reply by: Jackie C

0

Answer 1

Wow, that's not good! I do have some good news, though. I took the liberty of looking up your previous order, and saw that you ordered the #CM11400 slip-on mirrors. Replacement glass is indeed available as part #10802GL for the passenger side and…

view full answer...

Answer 2

Hey Rich, yes the replacement glass part #10802GL that you referenced is correct replacement passenger side glass for the CIPA tow mirrors #CM10950.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

Hey John, what dimensions specifically of the Curt A20 fifth wheel hitch part #C54VJ are you looking for? The height range of the hitch is between 17-1/2 and 21-1/2 inches which is normally the dimension people are looking for.

view full answer...

Answer 9

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 10

Hey John, thanks for reaching out! The correct Curt A16 5th wheel hitch fitment for your 2010 Toyota Tundra is the Kit #C57VJ, and that's if you have the 6-1/2' bed. This comes with a custom bracket mounting kit so you'll have minimal…

view full answer...

Answer 11

Hello Tyler, thanks for reaching out. I do have an option for you, but there is no custom fit gooseneck hitch made for the 1985 Ford F-350 Cab and Chassis with the 34" frame. The best option for this will be the Buyers Products Gooseneck Hitch…

view full answer...

Answer 12

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Replacement Passenger Side Glass for CIPA Towing Mirrors CM11300 on a 2016 Toyota Sequoia

Product Page this Question was Asked From

Continue Researching