Availability of Hubs That Use Inner Bearing LM67048 and Outer Bearing LM11949
Question:
Looking for hub and bearings for my trailer. Old bearings are LM 11949 and LM 67048. A 4 1/2 inch pattern. It has a taperd spindal that i believe is 11/4 x3/4 x 4
asked by: Gary H
0
Expert Reply:
We do not have any hubs or hub/drums in a 5-on-4-1/2 bolt pattern that use your particular bearings. The bearings in a replacement hub must match those in your originals in order for the hub to fit on your spindles.
We do offer one idler hub that uses inner bearing LM67048 and outer bearing LM11949 and that is 4-on-5 bolt pattern agricultural idler hub # AH15450ECOMP. This hub kit includes bearings, races and a grease seal and it is rated for off-road use up to 20-mph.
expert reply by: Adam R
0
Product Page this Question was Asked From
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Similar Expert Q&A Pages
- Replacement Hub Assembly For A Light Duty Snowmobile Trailer
- Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
- Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer Bearing
- 5 on 4-1/2" Idler Trailer Hub For Utility Trailer With 1-1/4" to 3/4" Tapered Spindle
- Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer Bearings
- Recommended Replacement Trailer Wheel and Hub for Old 4 on 5 Inch Agricultural Hub
- Correct Replacement Trailer Hub with .750 Inch Outer Bearing
- Trailer Hub That Fits a Spindle With 1-1/4" Inner Bearing and 3/4" Outer Bearing
- Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
- Is There a Trailer Hub/Bearing with 1.18 Inner Diameter
- Replacement Axles for 1977 Giroux Tandem Axle Boat Trailer
- Replacement Hubs for Oddball Axle or Axle Replacement for Boat Trailer
- Availability of Trailer Hub that Fits Spindle with Bearing Diameters of .75 and 1.25 inch
- Replacement Trailer Idler Hub With Inner Bearing 1.25" and Outer Bearing 0.75" Inner Diameters
- Replacement Hub With An Out Bearing And In Bearings That Measure .74" and 1.25" For 5 On 4.5 Wheel
- Trailer Hub Recommendation with Bearings LM67048 and LM11949
- Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
- Is There a Trailer Hub Assembly with 3/4" and 1-1/4" Bearings
- Replacement Hub for Axle With 09074 Outer Bearing and 15123 Inner Bearing
- Replacement Axle For Trailer With Obsolete DICO 15638 Brake Drum Assemblies
- Solution for Replacement Short Idler Hubs for Boat Trailer
- Replacement Axle Kit for Homemade Trailer
- Replacement LM11949 Bearing and LM11910 Race Needed
- Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Where to Measure When Replacing a Trailer Hub
- Recommended Hub for 3K Trailer Axle with 1.25" Inner and .75" Outer Bearing