Can a Trailer Axle be Converted to an EZ Lube Axle by Replacing Spindles
Published 07/21/2016
Products Featured in This Question
Question:
I want to upgrade to ez lube system . I have a wildwood light forest river t23 2005 trailer . 5x4 1/2 lugs, I would need axel and hub , I have a 4 hole plate for brake backingThanks
asked by: Jerry C
Expert Reply:
To upgrade to an EZ lube setup will require you to replace your axle or you could just replace the spindle. For a spindle with a 4 bolt mounting plate you would want the part # TRU74FR as it is an ez lube spindle. For a new hub/drum to fit this you would want the part # AKHD-545-35-EZ-K or for a idler hub part # AKIHUB-545-35-EZ-K.
Welding a spindle is not something we recommend most people doing. Most axles have these welded on at the factory with specialized jigs and higher precision welding equipment that what even experienced do-it-yourselfers have.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: grease seal 58846
- Search Results: 58846 seal
- Video: Installing the Double Lip Grease Seal for 3,500-lb Axles
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: self adjust trailer brakes
- Search Results: pre~greased trailer hubs and drums
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Shop: Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Q&A: Where are etrailer Electric Brake Assemblies Made and How do they Compare to Dexter Brakes
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Timken Grease Seal - Single Lip - I.D. 1.250" / O.D. 1.983" - 203029
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Shop: Vehicle Lights
- Search Results: 1a v 1260
- Video: All About the Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout
- Video: Detailed Breakdown of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Search Results: grease
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Double-Lip Wheel Bearing Seal to Replace AL-KO 568886 and Hayes 09103305 Seals
- Video: What to Know About the Bearing Buddy Bearing Protectors
- Video: The Low-Down on the Trailer Idler Hub Assembly for 2,000-lb Axles
- Search Results: 10~9 seal
- Q&A: Spare Tire Carrier Recommendation for a Featherlite Trailer
- Q&A: Are Trailer Wheel and Tire Combos Balanced
- Q&A: How To Install E-Z Lube Axles