Does Grease Seal # 34823 Feature a Garter Spring

Question

Question:

Part # 34823, Double Lip Grease Seal - ID 1.249inch / OD 1.983 Do these seals include a garter spring? The description does not say either way, and there are no pictures of the back side of the seal, but it appears there may be one in the brief views of the back side of the seal in the video review.

asked by: Robin R

0

Expert Reply:

There is indeed a garter spring in the # 34823 Double-Lip Grease Seal. If you view the product description video, you can briefly see the spring. I'd captured a frame from the video where you can see the spring a bit better.

expert reply by: Mike L

0

click to enlarge

Answer 1

Hey Will, thanks for reaching out. What I recommend for replacing your 7-way is the following: - etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector #e99011 Wiring your connections thru the junction box helps keep them…

view full answer...

Answer 2

The Trailer Brake Magnet, #BP01-225, that you have referenced is designed for use with 12 x 2 inch Dexter electric drum brakes for 7,000 pound capacity axles. A similar magnet, #BP01-180, fits Dexter 6K, Alko 6K and 7K after 1988 (excluding…

view full answer...

Answer 3

According to my contact at Dexter, the Dexter #BP01-225 is rated for use on up to a 7K axle and it is intended to fit Dexter and Dexter Nev-R-Adjust brake assemblies. It has a larger profile and may not fit on Hayes/Alko brake assemblies. Where as…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C13280 for 1987 - 2004 Dodge Dakota includes grade 8 hardware bolts. It is a 2" receiver with a concealed cross tube so the only portion of the hitch that is visible once installed is the receiver portion. I…

view full answer...

Answer 5

The dimension differences between your original seals and the replacements you referenced is small enough that the two sizes will still be interchangeable. Since both #34823 (a single seal) and #RG06-010 (a pair of seals) are the preferred double-lip…

view full answer...

Answer 6

For an equivalent double-lip grease seal to replace your original part 12192TB you can use part #RG06-010. This is a set of two double-lip seals that are compatible replacements for your original seal. These seals have an inner diameter of…

view full answer...

Answer 7

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

view full answer...

Answer 8

The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.

view full answer...

Answer 9

Hey there Brad, We do have a replacement for the 125255UC grease seal; the correct seal is the following: - Double Lip Grease Seal #34823

view full answer...

Answer 10

Hey Domingo, thanks for the picture and information. To replace your Dico 45263, you'll need the Easy Grease Trailer Idler Hub Assembly item #AKIHUB-545-2-G-EZ-2K and the Double Lip Seal item #34823. The Idler Hub item #AKIHUB-545-2-G-EZ-2K is…

view full answer...

Answer 11

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Answer 12

Hey John, are you sure that is the grease seal part number you need? We carry a replacement with the part #34823 but it is different from the #10-19 which comes with the kit you referenced so if that is what you need you would need to piece together…

view full answer...

Does Grease Seal # 34823 Feature a Garter Spring

Product Page this Question was Asked From

Continue Researching