Replacement Hubs with 5-on-4-3/4 Wheel Bolt Pattern
Updated 04/04/2016 | Published 03/30/2016
Products Featured in This Question
Question:
Looking for replacement hubs for a mobile homea axle I think I found some in here but Im not 100 sure there were 6 on 5 1/2 I really would like to have a 5 on 4 3/4 if at all possible its for light weightu use tna
asked by: Travis
Expert Reply:
We do offer 5-on-4-3/4 hubs that you can see on the linked page. These include both idler hubs like # 845475UC1 and hub/drums like # 845476UC3. Be sure to check the bearings in your current hubs for their part numbers; new hubs have to use the same bearings or they will not fit on your spindles. The linked photo will show you where to find those part numbers.
Also note that mobile home axles are intended for a single use only (to transport the MH) but not for ongoing use like a trailer axle.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bushings
- Video: Choosing the Right Trailer Fenders
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Search Results: clevis
- Search Results: cotter pin
- Search Results: 5 x 5 hub
- Search Results: axle cotter pin
- Search Results: trailer bearing washer
- Search Results: 17~110
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Measure for Trailer Hitch Drop
on Trailer Bearings Races Seals Caps
