How Boat Trailer Bunk Boards Attach to Bunk Brackets
Updated 04/01/2016 | Published 03/29/2016
Question:
I am re-doing a boat trailer to fit my 16foot Duracraft flat jon boat. I am in the process of attempting to install two 2 6foot bunk boards covered with marine grade carpet. I AM LOST AS A GOOSE AND NEED HELP BUYING FOUR BRACKETS AND HOW TO INSTALL TO BOARDS AND TRAILER with my comments/questions below: 1. Think I only need bracket with minimum vertical adjustment and no angle adjustment. 2. Could you respond to this email and sketch me a simple drawing of a 2x4 vertical bunk board attached to bracket and trailer? I can not vision how this all fits together, or give me a link to view this confusion. 3. How/where to attach to vertical bunk the wood screws? Thank you for your assistance.
asked by: JOHN E
Expert Reply:
The bunk brackets will attach to the trailer cross members using U-bolts. Since you don't need a swiveling bracket, the # CE10600G bracket you mentioned would work fine. I've provided a photo showing how the bunk board attaches to the bracket, which should answer all your questions.
Product Page this Question was Asked From
CE Smith Light Duty, Vertical Bunk Bracket - Galvanized Steel - 9-1/2" Tall - Qty 1
- Boat Trailer Parts
- Bunks
- Vertical Bunk Bracket
- 9-1/2 Inch Tall
- Galvanized Steel
- CE Smith
more information >
Continue Researching
- Search Results: bunk brackets
- Q&A: What is the Difference Between a Bolster Bracket and a Bunk Bracket
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Shop: Tie Down Swivel Bolster Bracket for Boat Bunk Boards - 8" Long - Qty 1
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Shop: CE Smith Light Duty, Vertical Bunk Bracket - Galvanized Steel - 9-1/2" Tall - Qty 1
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Roller Shaft for Boat Trailers - Zinc-Plated Steel - 11" x 5/8" - Qty 1
- Q&A: How Many Bolster And Swivel Brackets Are Needed For A Boat Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
- Shop: Brake Controller
- Article: Trailer Lighting Requirements
- Shop: Gooseneck Hitch
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer brakes
on Boat Trailer Parts
