bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Flat Tow Brake System Help Hub
  4. Flat Tow Brake System Q&As
  5. Question 158768
Q & A Icon

Parts Needed to Flat Tow a 2010 Ford Ranger  

Updated 03/28/2016 | Published 03/25/2016



Question:

I am looking at a setup for a 2010 Ford Ranger. If I have power assist brakes what do I need to make it work properly, or does that not matter? I am looking at the RM9100. I plan to build a bracket to mount under the seat to connect to. What extra kits will I need with this? I have an auto trans and will be building a driveshaft disconnect for the truck. Do I have to add a light bar to the rear? Thanks

0

Expert Reply:

For supplemental braking for your 2010 Ford Ranger with a tow vehicle with power assist hydraulic brakes you would want the part # RM-9060 which has been confirmed as a fit by Roadmaster. The recommended seat adapter is part # RM-88151 so that you wouldn't have to make your own adapter.

For a magnetic set of lights to attach to the rear of your Ranger you could use the Hopkins part # C6304.

You will also need a base plate kit, tow bar and safety cables. For a base plate you would want the part # 477-1 unless you have a XL or XLT and then you would need the part # 477-5.

The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>