How to Pick the Height for Installing E-Track on a Trailer Wall
Updated 03/16/2016 | Published 03/15/2016 >
Question:
what height would you recommend to mount etrack on a cargo trailer for just normal cargo . I was thinking about 3/4 the way up the wall. if the wall was 6 ft that would be 4 ft.
asked by: Jim P
Expert Reply:
The height of where you install the E-track will depend greatly on where it will work best for the cargo you plan to tow. Most people put it around half way up or lower. But once again that will just depend on where it will work the best for you.
You might take the sections out into the trailer with the cargo you plan to carry and see where it would work the best.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Q&A: Is there a Recommend Height from the Floor E-Track Should be Mounted in a Trailer
- Shop: Big Truck Big RV Tongue Weight Scale w/ Storage Bag for Trailers - 2,000 lbs
- Search Results: trailer tongue scale
- Shop: BOLT brand vehicle and hitch locks
- Article: Which Hitches are Made in the USA
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Best Place To Mount Backup Camera on Fifth Wheel RV
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to Toyota Key
- Shop: Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
- Shop: Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
- Q&A: What Does Weight Distribution Mean when Selecting a Trailer Hitch for a 2011 Ford F-150
- Q&A: Does Hidden Hitch 80232 Reduce Towing Capacity
- Q&A: How Can Longer Ball Mount Not Reduce Hitch Weight Capacity
- Search Results: ramp hinge
- Search Results: sleeve
- Search Results: sleeve style hitch anti~rattle
- Search Results: trailer hitch
- Search Results: trailer hitch ball mount
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: Can a Lubricant be Used With an Equalizer Weight Distribution Hitch?
- Shop: Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Greaseless Balls - 10" Drop, 11" Rise
- Shop: Curt Deep Drop Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 9" Rise - 15K
- Search Results: accessories and parts
- Shop: Headache Rack
- Video: Checking Out the Rack'Em Spare Tire Mount for Enclosed Trailers
- Video: ShockStrap Tie-Down Straps Manufacturer Demo
- Video: Let’s Check Out the ShockStrap Ratchet Tie-Down Strap w Shock Absorber
- Video: All About the ShockStrap Ratchet Motorcycle Tie-Downs w Shock Absorbers
- Shop: Brake Controller

