Compatibility of 168255TB Grease Seal with Dexter 8-248-50 or Kodiak Q-HUB84545 Trailer Idler Hub
Updated 02/24/2016 | Published 02/23/2016
Products Featured in This Question
Question:
Will the seal part# 168255TB work with the Kodiak Q-HUB84545? I also have Model 1980 Bearing buddies, these going to fit?
asked by: Ron
Expert Reply:
The # 168255TB seal is slightly smaller in outside diameter, therefore it wouldn't fit tightly enough in the hub bore of the # Q-HUB84545 hub. The hub is designed to use either a 10-19 or a # 58846 grease seal.
The hub you referenced has a 1.980 outer hub bore, so the Bearing Buddies you currently have will work fine. The hub uses a # L68149 inner and a # L44649 outer bearing. If the seal bearing surface of your spindles is about 1.719 inches, the hub would work just fine for you.
Product Page this Question was Asked From
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.69 Inch I.D.
- 2.56 Inch O.D.
- Dexter
more information >
Continue Researching
- Search Results: l68149
- Search Results: boat trailer guides
- Search Results: disc brake conversion
- Search Results: l44649
- Search Results: titan model 6
- Search Results: t1777405
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Video: All You Need to Know About the Kodiak Disc Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: Review of Titan Brake Actuator - T4820000
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Dexter Hub Vs. Kodiak Hub Comparison
- Q&A: Parts Needed To Upgrade Drum Brakes on Boat Trailer to Disc Brakes
- Q&A: Replacement Seals and Castle Nut for 2000-lb Dexter Axle with EZ-Lube Spindles and 5-Lug Hubs
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Replacement Hub Recommendation for Trailer with L44649 Bearings, and L44649 and L68149 Bearings
- Q&A: Recommended Replacement Hubs for Boat Trailer
- Q&A: Which Idler Hub For Kodiak Slip On Disc Brake Kit With 10" Rotors and 5 Lug Bolt Pattern
- Search Results: seal cross reference