Dimensions of the Bulldog Velocity Series Electric Landing Gear Jack
Published 02/12/2016
Question:
The pictures show a few dimensions for the mounting brackets, but I need more dimensions. -Mounting hole size -Bracket Height says 44.8inch but is that to the top of the top bracket? -Dimension from top of top bracket to top of motor -Dimensions of motor assembly
asked by: Adam
Expert Reply:
On the Bulldog jack # BD185400 the mounting holes require 1/2 inch hardware. I was able to determine that when fully retracted the overall height is 44.8 inches. It is about 33 inches to the top of the top bracket. The distance from the top of the top bracket to the top of the motor is approximately 11-3/4 inches.
The distance from the top of the bracket to the base of the motor at the back is approximately 3-3/4 inches tall. And the motor at the front hangs down approximately 4-1/2 inches at the front. The motor is approximately 5 inches wide.
Continue Researching
- Q&A: Recommended Replacement Landing Gear for 2007 Pilgrim 40 Foot 5th Wheel Trailer
- Q&A: Can Adapter Plate be Used to Install Bulldog Velocity Series 12K Electric Landing Gear Jack