Ground Connection for Optronics Thinline LED Lamp # STL63RB

Question

Question:

How is this light grounded ??? #STL63RB

asked by: John B

1

Helpful Expert Reply:

The lamp is grounded through a dedicated ground wire. The lamp has three wires exiting the rear, a white wire for ground (which is hard to see against the white background), a red wire for the brake lamp/turn signal and a black wire for the running lamp signal.

If you click the provided link, you can see a product description video for the Optronics Thinline LED # STL63RB lamp.

expert reply by: Mike L

1

Answer 1

Hello Mike, thanks for reaching out. Is the rear of your van sagging at all? The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA43 is more for reducing sagging which will in turn help with stability, handling and sway reduction.…

view full answer...

Answer 2

Hey Steve! The Furrion cameras can only be paired to one of the 7" Monitors #FR47FR at a time, but I still have good news for you. You can either use your current power wire, or you can use the Replacement Furrion Monitor Power Cable…

view full answer...

Answer 3

Hey Herb. The closest replacement option I have for your E333645 LED light, is the 12V RV LED Puck Light item #VAL64MB in warm white or item #VAL44MB in cool white. The cool white one is going to be that super bright style of light. The warm white…

view full answer...

Answer 4

I checked with the manufacturer, and the Optronics Tri-Bar LED RV Tail Light is indeed flush-mounted. The correct part number is the following: - Tri-Bar LED RV Tail Light #OPT27FR

view full answer...

Answer 5

It looks like you are using the Hott Rod RV Water Heater Conversion Kit #DGR6VP on your 6 gallon RV water heater. Since your connector is damaged you are going to need to replace the entire kit as they do not offer the connector for the heating…

view full answer...

Answer 6

Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load #C52027 has outside dimensions of 5" long x 3-3/4" wide x 3-3/8" tall and will fit the UB1250 style battery we carry which has dimensions of 3-1/2"…

view full answer...

Answer 7

There may be a repair/rebuild kit that you can use for your Atwood coupler. The kits are model specific so if you are able to provide a model number of your coupler I can see what we have available. Generally with some older Atwood couplers they can…

view full answer...

Ground Connection for Optronics Thinline LED Lamp # STL63RB

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching