Replacement Clearance Light Recommendation for a Yakima Rack and Roll Trailer

Question

Question:

The pictures show an amber lens . I just want verify the lens is amber which is what I need.

asked by: Zack O

0

Expert Reply:

The color of the lens of the Replacement Side Marker Light # Y8880178 that you referenced is amber. This is the replacement lens for the clearance light up near the front crossbar of the Rack and Roll trailers like part # Y08107.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement 4" LED Tail Light for Yakima Rack and Roll Trailer #8880212 are the correct replacements for your current incandescent tail lights on your 2006 Yakima Rack and Roll trailer. To convert the running lights you can simply replace…

view full answer...

Answer 2

The weight capacity for the standard Yakima Rack and Roll trailer like part #Y08107 is 250 lbs when used with the standard shocks. If you go to the HD shocks like part #Y08110 you increase that capacity to 350 lbs. This is recommended if you plan to…

view full answer...

Answer 3

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and certainly…

view full answer...

Answer 4

On HullyRollers that are several years old we have heard of the grey portion of the wheels turning sticky and grimy. While Yakima has stated that this is just something that happens over time I was able to do some searching on line and found a guy…

view full answer...

Answer 5

Hey Michael, The wheel for your Yakima Rack And Roll Kayak Trailer #Y08106 would be held in place with a single bolt. The bolt head would stick out past the wheel so you should be able to use another wrench to hold the bolt while you torque down the…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

Hey Jim, thanks for writing in, and thanks for the pictures, I love what you've done with that trailer! Oh and thanks for your kind words, we love you too. You’re well within what the Yakima Rack and Roll Trailer #Y08107 is built to handle. The…

view full answer...

Answer 8

Trailers use a combined wiring system meaning the brake lights and turn signals are on the same circuits. Since the brake lights are working on the trailer, and because you have tested the vehicle wiring and it is working properly, there is most…

view full answer...

Answer 9

Hey Blake, yeah it is a little difficult to let you know the exact best type of hardware to use to mount your lights in your Yakima HD crossbars but we do know that the Yakima T-Bolts part #Y8880184 are correct for the top channel of your crossbars…

view full answer...

Answer 10

Hello Jimmy, thanks for reaching out. The Yakima LowRider Kayak Trailer #Y82QD is going to have a 17.75" coupler height. The 2024 Honda CR-V has a hitch height of about 13.5". This means you will want a ball mount with about 4" of rise…

view full answer...

Answer 11

The size of the hitch ball itself is the same but there are differences between the standard hitch balls and a gooseneck ball. The shank on a standard hitch ball like the hitch ball you came from, part #BWHB94005, is threaded so that the nut can be…

view full answer...

Answer 12

Hello Karen, thanks for reaching out. The Yakima Rack and Roll Trailer #Y08106 is rated for highway speeds. Technically the trailer itself has a speed rating of 94 mph but we do not recommend ever towing anything that fast. Realistically you will…

view full answer...

Replacement Clearance Light Recommendation for a Yakima Rack and Roll Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching