Replacement Lens Availability or # 59 Clearance Light by Bargman and Optronics

Question

Question:

I see you carry Clearance Light Replacement Lens #59 Amber #34-59-012 and also the Replacement Amber Lens for MC32AB Trailer Lights #A32AB. Can you get one of each of these and tell me any differences in measurements etc by placing them right up to one another and comparing? It seems like they are the same and the less expensive A32AB could be used as a direct replacement. Can you actually try to fit the #A32AB lens on the Bargman #59 base. Does it fit?

asked by: Gary

1

Helpful Expert Reply:

The design of all of the parts you mentioned are the same. The replacement lens part # A32AB and part # 34-59-012 would both fit the # MC32AB. In the past we have done exactly what you asked about and tried fitting the different lenses and the different bases and found them to be the exact same.

expert reply by: Jameson C

1

Answer 1

Yes, the Optronics replacement lens part #A32AB does fit the Bargman 59 series light that you mentioned.

view full answer...

Answer 2

It sounds like you are looking for the Bargman 58 series clearance light part #30-58-002 lens which is the part #34-59-012.

view full answer...

Answer 3

We unfortunately no longer offer the replacement lens for this light so the only thing I can offer would be a complete replacement with the Optronics Trailer Clearance or Side Marker Light w/ Reflex Reflector #MC32AB. You could possibly use the…

view full answer...

Answer 4

I do have an option for you but the replacement lens for the Bargman #59 Series Clearance Trailer Light is no longer available. That said, we do have an upgrade kit which comes with a new lens, the Bargman LED Upgrade Kit for 59 Series Clearance…

view full answer...

Answer 5

Thanks for the picture of the light assembly you have. For a replacement lens you'd want the part #A32RB for a red lens or #A32AB for amber.

view full answer...

Answer 6

If you are looking for a red lens for your Bargman 59 Series light you would want part #34-59-010, if you need an amber lens you would need part #34-59-012.

view full answer...

Answer 7

There is still an option to find which bearings fit your axle, but without knowing the serial number of the axle you will need to pull one of the hubs. Once you have pulled the hub you will need to look for the bearing numbers stamped in the face of…

view full answer...

Answer 8

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 9

Hello Robert. I was able to cross reference the part number you provided to the Bargman #59 Series clearance lights. These lights have unfortunately been discontinued, so a direct replacement is not available. We do have a light that is virtually…

view full answer...

Answer 10

I cross referenced the Clearance Light Replacement Lens #59 Amber, part #34-59-012, with the number you gave me, SAE-A-P2-83. Part #34-58-012 is the replacement lens for the 59 series, or SAE-A-P2-83 lens that you have. It looks like the appearance…

view full answer...

Answer 11

If your races are #L44610, which they almost certainly are, you will want the following parts: Bearings: Inner bearing: #L44649 Outer bearing: #L44649 Grease seal: #10-9 Outer diameter: 1.987" Inner diameter: 1.5" Grease cap: 1.986"…

view full answer...

Answer 12

Hey Ryan, yes the Taskmaster part #TA69QR would be exactly what you are looking for. Its the same size and bolt pattern as what you need but is a radial like you are wanting and has a higher speed rating at 81 MPH so it would work great for your…

view full answer...

Replacement Lens Availability or # 59 Clearance Light by Bargman and Optronics

Products Featured in This Question

Continue Researching