Sway Bar Availability for Workhorse W-Series Motorhomes

Question

Question:

Roadmaster Anti-Sway Bars for the 0 W-Series by Workhorse Is this item a 1259-118 or a 1259-108? Thanks

asked by: Jim

0

Expert Reply:

The two sway bars you referenced are designed to fit different versions of the W-Series Workhorse motorhomes.

The part # RM-1259-108 is designed to fit the:

2000 - 2009 Workhorse W-Series W20
2000 - 2009 Workhorse W-Series W22
2000 - 2009 Workhorse W-Series W24

And the part # RM-1259-118 is designed to fit the:

2005 - 2009 Workhorse W-Series W16
2005 - 2009 Workhorse W-Series W18

expert reply by: Jameson C

0

Answer 1

We can definitely help you with suspension upgrade components for your 2009 Workhorse W18. We do carry both Roadmaster and Blue Ox brands and while both companies make excellent products our in-house installers slightly prefer Blue Ox items for their…

view full answer...

Answer 2

The best trailer hitch we have for your Workhorse W-22 Chassis is the Draw-Tite Ultra Frame Trailer Hitch Receiver part #41990-16. In order to fit the Ultra Frame to your Workhorse you will need to modify the brackets and crosstube to better suit…

view full answer...

Answer 3

For a 2005 Workhorse W22 chassis you will need steering stabilizer and mounting kit #RM-RBK13-RSSA. Steering stabilizer #RM-RSSB is just the stabilizer by itself, no install kit, and it is also not the recommended one for the W22. I have also…

view full answer...

Answer 4

For your 2006 GMC Envoy Denali you will need base plates #3109-1. To attach your EazAligner 2000 tow bar you will need adapter #RM-038 and quick disconnects #RM-201. If you do not already have safety cables you will need to add some, #RM-643. The…

view full answer...

Answer 5

Hey Kyle, for your Lippert Solera 2000 series awning you can use the Replacement Front Cover for Lippert Edge Awnings #LC32NJ for the front and #LC43UD for the rear and you'd be set! Did you damage yours?

view full answer...

Answer 6

For your 2004 Workhorse W22 chassis there isn't a specific custom front mounted hitch receiver. Because of that, I recommend using the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 if you have the clearance…

view full answer...

Answer 7

It's pretty simple. A 4-bolt rail uses four 5/8 inch bolts ran through the floor of the truck bed into the frame brackets. The bolts run down through the center of the raised part of the rail, as shown in the photo I provided. A 10-bolt rail uses…

view full answer...

Answer 8

The correct part to replace your current converter charger is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp part #PD4655V. This is an exact replacement and will be all you need to get back operational. I have…

view full answer...

Sway Bar Availability for Workhorse W-Series Motorhomes

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching