EZ Lube Grease Caps for 8x8 Single Axle Trailer

Published 09/03/2015

Products Featured in This Question

Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron

(64)

$72.35

Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1

(1318)

$5.30

Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2

(2299)

$15.59

Question:

what size ez lube bearing cap do i need. the old race box says L44610. the measurement of the bearing buddies is 2inch diameter as best i can measure. These are on a 8x8 foot single axle trailer

asked by: Richard G

Expert Reply:

Based on the # L44610 race you have on your trailer, you would want to use Grease Caps EZ Lube Drive in with Plug # RG04-040. Hubs that use this race have a hub bore measurement of 1.986 inches. These caps have an outer diameter of 1.986 inches and will fit snugly on the hubs.

One thing to keep in mind is that EZ Lube Grease Caps are designed to be used with EZ Lube spindles. If the spindle on your trailer axle is not an EZ Lube, then EZ Lube caps will not help you to more easily grease your bearings like the Bearing Buddy caps.

expert reply by: Victoria B