Recommended Ball Mount That Will Work With Shank Mounted Bike Rack
Updated 08/25/2015 | Published 08/24/2015 >
Products Featured in This Question
Question:
Trailer Hitch Ball Mount 3/4inch Rise or 2inch Drop Curt Ball Mounts D-4 Is there at least 6 inches between the pin hole and the part of the hitch that holds the ball? I have a bike rack that I need the space for it to fit. The 10 1/4 measurement between holes is the same as the hitch I am replacing. My current hitch was damaged and I am looking for a similar replacement. Thank you!
asked by: Tessie
Expert Reply:
The Curt Ball Mount, part # D-4 measures 10-1/4 inches from the center of the hitch pin hole to the center of the hole for the hitch ball as you mentioned. Since you said you need at least 6 inches, this ball mount would give you more than enough clearance for your bike rack.
This ball mount fits 2 inch receiver openings and uses a hitch ball with a 1 inch shank like part # 40038 for a 2 inch diameter ball or part # C40051 for a 1-7/8 inch ball.
If you need a hitch pin and clip I recommend part # C21500. If you want a locking hitch pin I recommend part # e98880.
If your hitch was damaged and needs to be replaced, just let me know the vehicle year, make, and model and I will be happy to make some recommendations that will work for you.
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- CURT
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Dimensions and Hole Spacing of Draw-Tite 41954 Class V Hitch
- Q&A: Will The Curt T-Connector C56378 Work On A 2015 Honda Odyssey With Backup Sensors?
- Q&A: Distance From Center Of Hitch Pin Hole To Hitch Ball On Blue Ox Adjustable Ball Mount
- Q&A: Recommended Hitch and Wiring Harness Needed To Tow A Trailer With A 2000 Toyota Landcruiser
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Replacement Coupler For An Atwood 2" Coupler
- Q&A: 50 mm Hitch Ball Recommendation for a 2 inch Trailer Hitch
- Q&A: Adjustable Ball Mount For a 50MM Hitch Ball That Fits a 2" Receiver
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Maintenance Schedule
- Article: Trailer Hitch Installation Tips
- Article: How to Strap a Kayak to a Roof Rack in 4 Steps (With Pictures)

