Weight Distribution System Recommendation Airstream Bambi 16 ft Towed by 2014 Wrangler Unlimited

Published 08/20/2015

Question:

We just bought an airstream Bambi 16foot pull behind camp trailer. I am in the market for a weight distribution hitch with sway control. We will be pulling the trailer with a 2014 Jeep Wrangler unlimited rubicon. What size and brand would you recommend for this application. Im thinking of a blue ox 350 lb unit. Have you had better luck service, etc. with a different brand?

asked by: Mark S

Helpful Expert Reply:

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.

Once you know your tongue weight you will want to check out the link I attached that has all of the weight distribution systems we carry. You will be able to select your tongue weight from the filters to see what would be rated for your setup.

Most likely your tongue weight will fall between 200 and 600 lbs. Which if so, the Reese Strait Line System part # RP66082 would be an excellent choice. This is also the only system on the market that works to prevent sway before it starts. I would highly recommend it for you. This would be a better choice than the Blue Ox, we have found that their lift brackets can be difficult to operate.

For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.

expert reply by: Jameson C