How to Pick Out Replacement Grease Seal for a Dexter 7000 lb Axle
Published 08/18/2015
Products Featured in This Question
Question:
bearings and seal i have the bearing numbers, bearing 25580 bearing 14125A but i am not sure which seal. I have a dexter 7000 pound axles. any suggestion, you show two kits with different seals.
asked by: Ed B
0
Expert Reply:
You are going to need to measure your current spindle to determine whether or not you need a 2-1/8 inch seal like # RG06-090 or if you need a 2-1/4 inch seal like # RG06-070.
You will need to take the measurement of the spindle where the grease seal rides. See attached picture.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: Trailer Wiring Diagrams
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Bearing Kit for 6,000 lb Dexter Axle
- Q&A: Disc Brake Kit Recommendation for 2022 Grand Design Reflection 337RLS
- Q&A: Replacement Bearing Kit for Brinkley Z3100
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule