Possible Solution for Replacing Trailer Bearing L44543
Updated 02/20/2018 | Published 02/19/2018 >
Question:
I need to replace some bearings that failed. The number on it is L44543. Searching the internet shows very little for L44543 but the L44643 is listed instead. Can you tell me is L44643 a direct replacement for L44543?
asked by: Rob R
0
Expert Reply:
That's not a number we are familiar with. What's the inner diameter of the bearing? If it's 1 inch most likely you have a L44643 and the 6 just happens to look like a 5.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44643 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.00 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 6 pin connector
- Search Results: light
- Search Results: 6 way connector
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: dexter 3500 lb axle
- Search Results: l44510
- Search Results: l44643
- Search Results: l44543
- Shop: Pollak Trailer Wiring Adapter - 7-Way RV to 4-Way Flat
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C
- Video: Feature Review CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: An In-Depth Look at the Curt 6-Pole Square Trailer Wiring Connector Loop
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Video: Let’s Check Out the Washer For 1" Spindle
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: All About the Deka Heat Shrink Butt Connector
- Video: A Closer Look at the LED Combination Trailer Tail Lights
- Shop: Trailer Hitch
- Q&A: Replacement Spindle For 1995 Calkins Boat Trailer
- Q&A: Replacement Hub w/ a 5 on 4-1/2 Lug Pattern and L44643 Inner and Outer Bearings
- Q&A: How to Determine What the Correct Replacement Hub Is
- Q&A: Are Taillights STL8RGB and STL9RGB a Set? What Butt Connectors and Shrink Wrap do I Need?
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR

