Spare Tire/Wheel Combo and Tire Carrier for 2005 Load Rite PWC Trailer w/ 205/65-10 Tires

Updated 07/16/2015 | Published 07/15/2015

Products Featured in This Question

Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C

(7669)

$100.65

Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C

(7534)

$113.10

Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range D

(7534)

$136.22

Replacement U-Bolt for CE Smith Spare Trailer Tire Carrier - 12-1/4" Long

(19)

$10.71

CE Smith Padlock Brackets for Spare Tire Carriers - Zinc-Plated Steel - 1 Pair

(102)

$12.53

Master Lock Laminated Steel Padlock - 1-3/4" Wide - 5/16" Diameter Shackle

(25)

$15.64

Question:

Hi I have a 2005 load rite trailer that carries two seadoo pwc. Im looking for a spare tire and rim. Also a trailer mount for the spare, if you have one. My rim is 10x6 and the tire is Innova Driver size 20.5x8.0x10 205x65x10. The rim is 5 bolt aluminum but Im looking for least expensive. Do you have one?

asked by: Mark

Expert Reply:

Since you'll be dealing with a marine environment, I'd recommend using a galvanized wheel. I'm assuming your existing wheels have a 5 on 4-1/2 inch bolt pattern.

If a load range C tire (1100 lb capacity per tire) capacity is sufficient, the # AM3H400 wheel/tire combo would be work well for you. If you need a heavier weight rating, go with # AM3H440 which is a D rated tire with a 1330 lb per tire rating.

For a spare tire carrier, I'd recommend the CE Smith # CE22011Z and the padlock brackets, part # CE26002Z-2. A padlock like # ML1KA would complete the setup.