Required Mounting Hole Size for Submersible LED Trailer Tail Light # STL211RB

Updated 07/16/2015 | Published 07/15/2015

Products Featured in This Question

Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens

(504)

$35.41

3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(381)

$4.69

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(647)

$8.00

PVC Grommet for 6-1/2" Oval Trailer Tail Lights

(966)

$4.69

Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red

(1645)

$12.43

Question:

As this is a recess mounted light, what are the required hole dimensions? For this light, they arent given here or on the Optronics Sell Sheet. I would assume the dims would be the same as for the STL72RB and that the STL211RB would be with additional wiring and one additional PL-3 connector, per light an almost direct replacement for the STL72RB.

asked by: Phillip

Expert Reply:

You are correct, the Trailer Tail Light # STL72RB and # STL211RB are going to be the same size and both use Rubber Grommet, # a70gb, in order to be flush/recessed mounted. I have included a photo which lists the measurements of the grommet.

The # STL211RB is going to require an additional wire pigtail, # A47PB for right angle and # A45PB for straight.