Bearing Kit for Dexter Trailer Axle with Standard Spindles
Published 07/06/2015
Products Featured in This Question
Question:
What bearing kit is required for axle T20BTR-7258?
asked by: Todd P
Expert Reply:
The bearing kit that fits the Dexter trailer axle # T20BTR-7258 is part # BK1-150. This includes two bearings, two races, a 10-60 seal, EZ Lube spindle washer, and cotter pin.
The bearings included in this kit are a match for the inner and outer bearings for the # T20BTR-7258 axle.
You will want to make sure that the races and seal will fit inside the hub you will be using. The seal has an outer diameter of 1.987 inches and the races have an outer diameter of 1.980 inches.
If you do not already have hubs for your axle, I recommend the Dexter Trailer Hub Assembly # 8-91-05UC1-EZ for 4 on 4 bolt pattern. For a 5 on 4-1/2 bolt pattern, I recommend Dexter Trailer Hub Assembly # 8-258-5UC1-EZ.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Axle Components For Dexter D80 8,000LB Axle Under 2016 Landmark Orlando 5TH Wheel
- Article: How to Measure a Boat Trailer Axle
- Q&A: What Leaf Spring Should Be Used With 2,000 lb Axle?
- Q&A: Need New Leaf Springs For 2021 Grand Design Momentum 397
- Q&A: Where to Find The Axle Serial Number On Dexter Axles Manufactured After April 2001?
- Q&A: Replacement Axle For Dexter 3500lb SLR Axle
- Q&A: Dexter 3,500 lbs Replacement Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern