Recommended Axle And Fenders For Karavan Trailer
Updated 08/26/2020 | Published 06/30/2015
Products Featured in This Question
Question:
need a trailer axle flange to flange is 82 5/8 spring center is 76 or 78 need 3500 lb no easy lube also need a fender for a karavan trailer 43 in long with step on top and both sides. black plastic right side can you help me getting the parts I need thank you. Thanks for any help
asked by: Jim
Expert Reply:
The 3,500 lb axle we offer that meets the 82-5/8 flange to flange measurement you mentioned you need is part # T3584F-8974. The spring to spring measurement for this axle is 74 inches. None of the axles we offer in this weight capacity have the 76 or 78 spring-to-spring measurement.
The U-bolt mounting kit I recommend is part # APUBR-1. This includes the U-bolts, plates, and hex nuts needed for installation.
If you are looking to buy new springs for your trailer you can check out the attached product page for the springs we offer for 3,500 lb axles.
I have attached a link to the product page for the fenders we offer that can work for you. You can use the menu to select the size wheels you have and then choose the fender that will work. The fender we have that best matches the dimensions you gave is for 14 inch wheels and is part # F008584. If you have 13 inch wheels I recommend part # F008583. For 12 inch wheels use part # F008582.
Shaun C.
8/12/2020
Hello, I have a karavan HCT-4000-S-TDB-78 trailer and the I need to know the size of the spindle nut so I can take it off and replace the bearing for the hub. It is a castle nut and I think the spindle is 1". Any help is appreciated!! Regards,
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Replacement U-Bolt for 2-3/8" Round Axle - 5-1/8" Long - 7/16" Diameter - Qty 1
- Search Results: dx23cr
- Search Results: bullet proof
- Search Results: apubr~1
- Q&A: Replacement U-Bolt For Dexter Axle Over-Under Conversion Kit for 3500-lbs Axles with 2-3/8 Diameter
- Search Results: 115052
- Search Results: 156767
- Shop: Suspension Enhancement
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: Rubber Wiper Seal for RV Slide Out - Stick On - 30' Long x 3" Wide
- Shop: Rubber Wiper Seal for RV Slide Out - 1/4" Flange - 15' Long x 2-1/2" wide
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
- Q&A: Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
- Q&A: How to Determine the Appropriate Solar Panel Kit For an Off Grid Trip in a 2006 Starcraft Trailer
- Q&A: Replacement Axle Options For AL-KO 4,400LB Axles w/ 85" Hub Face, 6 on 5-1/2" Bolt Pattern w/ Brakes
- Q&A: Upgrading to 6k Axle on 2019 Grand Design Relfection 28BH
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Accurately Measure Trailer Leaf Springs
Joanne
6/6/2020
I am looking for an axel for my Karavan tandem trailer. The trailer is around 20 years old and the measurement is approx 95" Can you help???