Fulton Trailer Fenders - Top and Side Step - F008584 Review

content loading

Customers compare F008584 to these similar products

Products Featured in this Video

Review of Fulton Trailer Fenders F008584

Today we'll be review part number f008584. This is the Fulton single axle trailer fender with top and side steps. It's in a nice color of black, and it's designed to fit fourteen inch wheels. This part number includes one fender. Here on the bottom we do have mounting slots. Two on this side.

Two on this side for easy installation. This is designed to be mounted using your previous mounting hardware. If you can't use that, then you can purchase some mounting brackets from our website. All you'll need to do is just determine the mounting location and style of bracket that's going to work best on your trailer. These mounting holes are going to be separated from center to center by three and three quarters of an inch. It's going to give us a measurement of seven sixteenths of an inch by three quarters of an inch.

Those sets are identical on either side. It also has the three steps. One, two, three. They have nice textured surfacing, so you're not going to lose your grip. The top step is going to give us a depth of about five inches, and a width of about eight inches. These two steps are identical.

You're going to give us a depth of about nine inches. In it's widest point it's going to give us a width of about six and a half inches. The fender has a weight capacity of three hundred pounds. It's made from a high-density polyethylene material, so it's going to be corrosion proof and impact resistant. It's also scratch proof, because the black color is not painted on. It's actually molded into the plastic. Here on the front we have the nice contoured lift that goes around the front of the fender.

That's going to help keep items form exiting the fender and damaging vehicles and objects around us. Also, on the backside we have the fender skirt. It's going to perform that same responsibility, but it's going to keep most of that material out from the cargo area of our trailer. This is designed to be used with single axle trailers. With fourteen inch diameter wheels. You can use this for either the driver or passenger side. Let's go ahead and go over the overall length real quick. It's going to give us a measurement of about forty-two and five eights of an inch. The height is going to measure at twelve and three quarters of an inch. The overall width is going to measure at about nine inches. The fender itself is pretty light way. It weighs right around five pounds. That's going to do it for today's review of part number f008584. This is the Fulton single axle trailer fender in black for fourteen inch wheels. .

Questions and Comments about this Video


Have a loadrite trailer 14in tires will these fit??

Etrailer Expert
Reply from Rachael H.

This fender is designed to fit single axle trailers with 14 inch diameter wheels, so these should work for your Loadrite Trailer.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.