Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle
Updated 06/24/2015 | Published 06/22/2015
Products Featured in This Question
Question:
I am looking for drum to disk conversion kit. 1997 ezloader 14 foot wheel and 5 lug nuts
asked by: Eric B
Helpful Expert Reply:
To convert your EZLoader trailer to disc brakes you will need a couple things.
I called my contact at EZLoader and with the VIN you supplied they told me you have a 3,500 lb axle on your trailer and they told me what size bearings your trailer uses. To convert your trailer to disc brakes I recommend the Kodiak Disc Brake Kit, part # K2HR35D. This is designed for wheels 13 inches and larger with a 5 on 4-1/2 bolt pattern, and with a 4-bolt brake mounting flange.
The inner bearing has an inner diameter of 1.378 inches and the inner diameter of the outer bearing measures 1.063 inches. If any of these dimensions do not match the components you have on your trailer, you can check out the attached helpful article that explains what is needed and how you can measure the spindle on your trailer to make sure you get the right parts.
This disc kit includes 2 full brake assemblies needed to convert your brakes. The only added part you need is part # BH-3MFS-1. These are flexible lines that allow the calipers on the disc brakes to move freely when used.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Video: Review of CE Smith Boat Trailer Parts - Rollers - CES54JR
- Shop: CE Smith Side Guide Roller for Boat Trailers - Polyurethane - 12" Long - 1/2" Shaft
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: What to Know About the Kodiak Disc Brake Kit
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: All You Need to Know About the Kodiak Disc Brakes
- Search Results: kodiak trailer brakes
- Search Results: caliper bracket
- Q&A: Picking Out Disc Brake Components for EZ Loader Trailer
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Integrated Rotor - Dacromet - 3,500
- Q&A: Does The Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10HRD Come With Hardware
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Video: Replacement Mounting Bracket for Kodiak Disc Brake Caliper Review
- Video: Replacement Mounting Bracket for Kodiak Disc Brake Caliper Spec Review
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Search Results: 10~19
- Search Results: 9~123~1
- Video: Review of Demco Trailer Brake Mounting Flange - DM52415
- Search Results: trailer tires and wheels
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath Brakes
- Q&A: Will 3,500 lb Kodiak Disc Brake Kit Fit 2012 EZ Loader Boat Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
on Accessories and Parts
