Availability Of 5-5 1/2 Inch Hub Assembly, Spindle, Bearings Rated For 1,750 lbs. Each

Updated 05/06/2010 | Published 05/05/2010

Products Featured in This Question

#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter

(124)

$80.21

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2- Pre-Greased

(374)

$148.37

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" - 5 on 5-1/2 - Pre-Greased

(1087)

$119.21

Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2

(2165)

$14.18

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2710)

$6.23

Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide

(39)

$60.11

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

(124)

$64.24

#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter

(176)

$92.87

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

(124)

$85.67

Question:

What I would like is a set of hubs pattern 5 on 5 1/2 which I found but hard to find the spindles I need to match the bearing size can you work up a package price for 2- Hubs bolt pattern 5 on 5 1/2 with spindles that fit say rated at 1750lbs each or combined 3500 lbs rating? If you can give me the options also such as round, square and with brake backing plate mount I would appreciate it.

asked by: jim K

Expert Reply:

I have the Dexter Trailer Hub Assembly - 3,500 lbs Axles - 5 on 5-1/2, # 84555UC1, which is rated at 1,750 lbs. each. The bearings, races, cap and seal included.

The only other option I would have is the Dexter Trailer Hub & Drum Assembly - 3,500 lbs. Axles - 5 on 5-1/2, # 84557UC3, if you were wanting brakes. The capacity is 1,750 lbs. and comes with a 10 inch X 2-1/4 inch drum. It also comes with bearings, races, cap and seal.

The spindles that are available for both hub assemblies with the 1,750 lbs capacity are the TruRyde round Spindle # TRU64FR, which is a 8-1/4" long spindle, the TruRyde square Spindle # TRU47FR, which is an 8-1/4" long spindle, or the TruRyde round Spindle # TRU84FR, which is an 11-1/4" long spindle.

If you are wanting brakes you can use the #84 EZ Lube round Spindle, # TRU74FR. It comes with a brake mounting flange. Then you can use the Dexter Trailer Hub Assembly, # 84557UC3, that I mentioned above, but you would need to add the TruRyde Grease Cap, 1.986 inch OD EZ Lube Drive in with Plug, # RG04-040, and the TruRyde Grease Seals 10-19 (pair), # RG06-050.