Replacement Brake assembly and Hub for a Flagstaff 26RLSS

Updated 06/16/2015 | Published 06/14/2015

Products Featured in This Question

Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs

(211)

$62.02

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs

(372)

$66.56

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs

(378)

$55.88

Question:

Need both brake assembly and hub for my camping trailer. The brak assembly is a Dexter 10 x 2 elect PRI-FF-SEC-FF Dexter 36-19 is stamped on the back.The hub is AL-KO 8500 with markings 0F01, MAX DIA 10.090 WF-2. Can you help with part numbers

asked by: Danny C

Expert Reply:

In order to recommend a replacement hub/drum, I'll need to know the wheel bolt pattern used by your current hub (see link) and the reference numbers from the inner and outer wheel bearings. This way, you'll be assured of getting a hub/drum compatible with your existing wheels and spindles. If you'd care to reply with this information, I'd be happy to make some recommendations.

For a brake assembly, I'd recommend going with a etrailer.com Self Adjusting Brake Assembly, part # AKEBRK-35R-SA for the right hand side and # AKEBRK-35L-SA for the left hand side. Like the name indicates, after the initial set up, no further adjusting is required of the brake assemblies.

The # AKEBRK-6L you referred to won't work for you, as it's a 12x2 brake assembly, and you stated you needed 10x2.

expert reply by: Mike L