Installation of DrawTite # 75778 Class III Trailer Hitch on 2010 Infiniti FX35
Updated 05/03/2010 | Published 05/01/2010
Products Featured in This Question
Question:
Is removal of splash guards, underbody panels, and/or tow hook, or trimming of the passenger side underbody panel required with the DrawTite #75657 as are required with the Curt # 13554 hitch? Thank you.
asked by: Perry M
Expert Reply:
To install the Draw-Tite Class III receiver hitch part # 75657 on your Infiniti, the splash guards, under body appearance panels and tow hook will need to be removed. Once the installation is completed, the splash guards will be replaced, but the tow hook and the under body panels will not be re installed as they would interfere with the hitch. If you choose to install the hitch, we recommend keeping these removed items in the event you should decide to remove the hitch in the future.
For your convenience, I will provide a link below to the installation instructions.
If you'll be towing with your hitch, you might need the following to complete your towing system:
Trailer Wiring Harness, part # 118593
Ball Mount, part # C45030
1-7/8 Inch Trailer Ball, part # 19260
2 Inch Trailer Ball, part # 63845
Locking Hitch Pin, part # e98882
