Brake Controller Install Port Location on a Toyota Land Cruiser
Updated 06/08/2015 | Published 06/06/2015
Question:
Hi, have a 2015 Toyota Landcruiser that I wish to use a wiring harness to allow my tekonsha p3 brake controller to swap to another vehicle. Ive checked under the dash of the Landcruiser and the only obvius connector see pic I can find looks different from the one you recommended for this purpose on your on your website, which I understood to be code 3040-P. Please could you confirm what type I need from you with this information. Thanks for such a comprehensive website!
asked by: Christopher S
Expert Reply:
The connector you sent in a picture of is not the brake controller port. You would want to look for the female style plug that would match the connector in the picture I submitted.
We have had customers state that the location of the brake controller port on the Toyota Land Cruiser is under the dash behind the switches for the mirror. You will need to take apart the lower dash panel and then push out the switch panel. There is no need to detach any switch, it all hangs out just fine according to one customer. I have included the pictures they sent to us.
The correct harness to use to install the P3 # 90195 would be the # 3040-P.
Continue Researching
- Shop: MCD Innovations RV Shade Repair Kit - Duo - Mini Spring Kit - 17mm
- Q&A: Replacement Hub for Dexter 5200 lb Axle with Nev-R-Lube Bearings
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Search Results: tubs rv showers and tubs
- Shop: MCD Innovations RV Shade Repair Kit - Duo - Small Spring Kit - 17mm
- Shop: MCD Innovations RV Shade Repair Kit - Solo - Mini Spring Kit - 17mm
- Shop: Brake Controller
- Shop: Repair Kit for Schwintek In-Wall RV Slide-Out Systems
- Shop: Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Video: Review of Redarc Trailer Brake Controller - Tow Pro Liberty Proportional With Harness - RED82CR
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Trailer Wiring
- Search Results: redarc trailer brake controller
- Search Results: etbc7l
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Difference Between ST225/75D15 and ST225/75R15 Trailer Tire
- Q&A: Installing Curt Echo Wireless Brake Controller to Factory 7-Way Trailer Connector
- Video: An In-Depth Look at the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation
- Video: How to Install: Curt Echo Wireless Brake Controller on your 2020 Subaru Outback Wagon
- Video: Install: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation on a 2023 Toyota Highlander
- Video: Trailer Brake Controller Installation - 2008 Toyota FJ Cruiser Part 1
- Video: In-Depth Review of the Universal Installation Kit for Trailer Brake Controller
- Video: Curt 2 to 3 Wire Tail Light Converter: The Breakdown
- Q&A: Does 2011 Toyota Land Cruiser Have Trailer Wiring?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Does Brake Controller Install in Tiffin Phaeton 40AH
- Q&A: Comparing Aluma-Tow Adjustable Ball Mount To B&W, etrailer, and Trimax
- Q&A: Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500
on Trailer Brake Controller
