How to Choose Replacement Spindle Washers
Updated 05/22/2015 | Published 05/21/2015
Products Featured in This Question
Question:
Where would I find spindle ID ## to find out what washers I need .my used 4 lug axle did not have any washers .all the vidios I watched have one or two washers
asked by: Jason
Expert Reply:
You can identify the correct D-washer for your spindles by confirming the axle capacity on the axle's identification sticker or plate.
If you have a 3500-lb to 5200-lb axle (or a regular duty 6000-lb axle) you can use # 5-23. If your axle is rated for 6000-lbs (heavy duty), 7000-lbs or 8000-lbs or is a pre-1989 9000-lb axle) you can use part # 5-57. If you have E-Z Lube spindles you can use tang washer # 5-101.
All of these have a 1-inch inner diameter.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: dexter axle d35
- Search Results: trailer spindles
- Search Results: spindle cotter pin
- Search Results: 006~190~00
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Replacement Nut Retainer for 6-191 Jam Nut
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Article: Most Popular Wheel Bearings
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Search Results: trailer hub
- Search Results: led light trailer lights
- Video: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles Review
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: Trailer Idler Hub Assembly for 2,000-lb Axles: The Breakdown
- Video: What to Know About the Trailer Hub Assembly
- Video: Feature Review LED Combination Tail Light Kit for Trailers under 80" Wide
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles
- Q&A: What Size Spindle do Bearings L68149 and L44649 fit on
- Q&A: Does Grease Cap Included with # 8-258-50UC1-EZ Hub Act Like A Bearing Buddy
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Q&A: Availability of Hubs that Fit 2,200 lb Lippert Axle Spindles
- Q&A: Replacement Hub Recommendation for 2,200 lb Motorcycle Trailer Axle with 5 on 4-1/2" Bolt Pattern
- Q&A: Recommended Galvanized Hubs For Utility Trailer Used For Aluminum Boat Launching
- Q&A: Trailer Hub that Fits Axle with 2,200 lb Capacity with 5 on 4-1/2 inch Bolt Pattern