Recommended Clearance Between Trailer Frame Rail and Trailer Tire
Updated 05/19/2020 | Published 04/15/2015
Question:
HOW MUCH CLEARANCE IS NEEDED FROM INSIDE OF 15 IN. TIRE TO FRAME ON A TRAILEr
asked by: HAROLD L
Expert Reply:
The minimum distance between the inside of a tire and the frame rail depends a lot on the setup of the trailer. But as long as the tire and the frame don't touch you would be fine. It's hard to give an exact figure as trailer setups can vary and some trailers may have more side to side movement which would call for more clearance. If the suspension is good on the trailer and not worn out I would go with at least 1-1/2 inches to be on the safe side.
Product Page this Question was Asked From
Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 5.70-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Search Results: bearing l44649 trailer bearings races seals caps
- Search Results: trailer bearing grease
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: How Much Clearance Between the Frame Is Needed for a Trailer Tire
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Video: Trailer Axle with Idler Hubs Review
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: Recommended Spacing Between Trailer Tire and Inner Fender
- Q&A: What is Minimum Clearance Between Trailer Tire Sidewall and Trailer Frame
- Video: A Closer Look at the Dexter Trailer Springs Over-Under Conversion Kit
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Does Trailer Axle with Idler Hubs e32GR Come With Spindle Washer Trailer Axle with Idler Hubs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Q&A: Does Spring Seat to Spring Seat Dimension of Trailer Axle Have to Match Perfectly for Replacement
- Q&A: Recommended 12 Inch Tires Compatible With Highway Speeds for Haul Master Trailer
- Q&A: Is 12 inch Trailer Wheel and Tire Decent Option for Trailer
- Video: Feature Breakdown: 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles
Al T.
5/15/2020
I have a 1997 Kwik Kamp, pop up motorcycle trailer, the trailer has 5.70-8 Bias Trailer Tires on it that are rated for 65 MPH. Is there a tire that I can purchase for my camper that will allow me to go at a faster speed?