This wheel is made from durable steel, built to handle repeated use and long trips. With a load rating of 2,200 lbs, it provides the strength and reliability you need for steady towing mile after mile. The solid steel build gives confidence that your setup can handle real-world road conditions without worry.
The beveled stud holes let the wheel seat snugly against the hub, creating a tight, reliable fit. Once installed, there’s no need for constant lug nut retightening after every trip. It’s a simple detail that makes a big difference in keeping things solid and maintenance low while on the move.
The black powder coat finish not only looks sharp but helps protect against wear over time. The classic spoke design gives a timeless look that fits right in on just about any trailer setup. It’s a clean, dependable design that stays looking good through miles of use.
Finding the right match is straightforward with this wheel’s common specs. The rim measures 15" in diameter by 5" wide and uses the widely used 5 on 4-1/2" bolt pattern with a 3.19" pilot diameter and 1/2"-20 wheel bolts. That means easy fitment when you’re swapping out or adding a spare without extra guesswork.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Lionshead, 15 inch by five inch black spoke steel trailer wheel. It has the five on four and a half inch bolt pattern. Now this is a steel wheel, has the multi spoke design to it. It's sturdy and corrosion resistant. You notice it has a nice rust resistant finish, which will include a black powder coat finish on both sides of the wheel.
Now if you notice the center cap is not included with this wheel. If you do want a center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole 'cause when you install your center cap, it'll slide through this hole, the diameter on the pilot hole right here is 3.19 inches. If you notice also, the valve stem is included, it's pre-installed. And this wheel will meet the DOT and SAEJ 1204 specifications.
And this is made in the USA. Few dimensions on this wheel. We're gonna measure the diameter. And the diameter on a wheel is always measured inside to inside or bead seat to bead seat. So you can see if we take our tape measure and we go bead seat to bead seat is 15 inch diameter.
The width, it's gonna be the same way. It's inside to inside or bead seat to bead seat. There's your five inch width. And this wheel does have a bolt pattern of five on four and a half inches. And if you wanna measure that on a wheel like this, that's an odd number of lugs, five lugs.
What you'll need to do is pick any one of the lug holes, let's say this one, and then you're gonna measure across to either one of these holes. And when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one, if we measured, it'd be four and a half inches, so it's a five lug, four and a half inch bolt pattern. Does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 2,200 pounds. Now we do also offer many other items for your trailer. Just click on the trailer type, trailer tab that's at the top of our website page. And also if you have any other questions regarding this part or any other item that we carry, please feel free to reach out to us so that we can help get your questions answered. But that's gonna do it for a look at the Lionshead, 15 inch by five inch black smoke steel trailer wheel with the five on four and a half inch bolt pattern.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Thank you for the safe packaging and fast delivery!
Nice rim for the price
Nice sturdy piece hope I don’t need it
Arrived as advertised. Thank You
Looks good!
So far so good! The powder coat is great and they arrived fast and free shipping was awesome
The site was easy to navigate and figure out which trailer wheel I needed. Got the wheel quickly and the quality is top notch.
Exact OEM wheel for my Salem travel trailer. Add to that the price, communication and lightning-fast shipping from etrailer and I couldn’t be happier with this transaction.
Can't believe how soon I got it great j ob
Nice wheel, just need to switch the valve stem out to a high pressure valve stem.
Excellent build, and looks sharp!
Wonderful customer service with a knowledgeable & friendly staff. Quick shipping with great packing & excellent communications. Thanks a ton, I'm glad I went with eTrailer!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.