Replacement Vent Cover Recommendation for a 1982 Avion Trailer

Updated 03/16/2015 | Published 03/14/2015

Products Featured in This Question

Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White

(3889)

$28.64

Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White

(355)

$63.15

Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic

(1292)

$38.50

Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape

(146)

$10.73

Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White

(61)

$25.32

Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White

(61)

$21.32

MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White

(58)

$35.77

Question:

Hi. Do you have a vent cover to fit a 1982 Avion Trailer? I am having a hard time finding one to fit. The vents have fans in them, by the way. Thanks.

asked by: Deborah D

Expert Reply:

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".

To pick the correct cover, you will also need to know the type of hinge you need.

There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.

In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..