How to Install a Prodigy P2 Brake Controller in a 2014 Ford F-150

Question

Question:

i have a Tekonsha P2 Brake Controller and Ford Connector Item# 3035-P. i previously had this installed in my 1998 Ford Expedition. I just purchased a 2014 Ford F-150 which has a towing pkg but does not include a brake controller will this unit and wire work.

asked by: Richard S

0

Expert Reply:

To install your P2 Brake Controller part # 90885 in your 2014 Ford F-150 with the tow package all you need is the correct install harness, part # 22292. The # 3035-P would not work for you so I cannot recommend it for you.

To see how the brake controller and harness will install in a very similar 2013 Ford F-150 check out the install video I attached. The vehicle may be a different year but the install will be identical.

expert reply by: Jameson C

0

Answer 1

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

view full answer...

Answer 2

The N.C code on the Tekonsha Prodigy P2 Trailer Brake Controller #90885 means that a trailer is not connected which is usually caused by the controller not getting enough power. This can usually be fixed by cleaning the connection, checking the…

view full answer...

Answer 3

That's not a good sign. That means there's an internal problem with the controller and it needs to be replaced. You might try unplugging the controller for a minute and plugging it back in to see if resetting it helps, but otherwise it's…

view full answer...

Answer 4

According to the troubleshooting directions, the Er code that is showing on your Prodigy brake controller indicates that there is an internal brake control problem. There is nothing that can be done to fix this and the recommendation is to return the…

view full answer...

Answer 5

Sounds like you have a Tekonsha Primus IQ brake controller part #TK90160. I attached a link to this page that has the owners manual/install instructions and then for a replacement wiring harness you'd want the part #20127.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

How to Install a Prodigy P2 Brake Controller in a 2014 Ford F-150

Featured Help Information

Miscellaneous Media

Continue Researching