Identifying Tekonsha Brake Controller that has Number N26802

Question

Question:

I received good response, however the item that was identified is not the unit I have. It appears to more along the look of the Prodigy line. So, I’m still at a loss regarding what model it is and the pigtail(s) that need to hook it up. I will attach a photo of the device, perhaps that will help.

asked by: Philip A

0

Expert Reply:

Sounds like you have a Tekonsha Primus IQ brake controller part # TK90160. I attached a link to this page that has the owners manual/install instructions and then for a replacement wiring harness you'd want the part # 20127.

expert reply by: Jameson C

0

click to enlarge

Philip J.

5/29/2020

I received good response, however the item that was identified is not the unit I have. It appears to more along the look of the Prodigy line. So, I’m still at a loss regarding what model it is and the pigtail(s) that need to hook it up. I will attach a photo of the device, perhaps that will help.

Reply

Jameson C.

5/29/2020

That's definitely a Prodigy P3 part # 90195 which uses the same install harness # 20127.

Reply

Answer 1

Your running lights not working on your trailer when everything else works is most likely a bad fuse especially because you know the 7-way on your truck has no power at the connection. According to the picture you attached, you will need to check…

view full answer...

Answer 2

That's not a good sign. That means there's an internal problem with the controller and it needs to be replaced. You might try unplugging the controller for a minute and plugging it back in to see if resetting it helps, but otherwise it's…

view full answer...

Answer 3

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

view full answer...

Answer 4

The N.C code on the Tekonsha Prodigy P2 Trailer Brake Controller #90885 means that a trailer is not connected which is usually caused by the controller not getting enough power. This can usually be fixed by cleaning the connection, checking the…

view full answer...

Answer 5

According to the troubleshooting directions, the Er code that is showing on your Prodigy brake controller indicates that there is an internal brake control problem. There is nothing that can be done to fix this and the recommendation is to return the…

view full answer...

Answer 6

To install your P2 Brake Controller part #90885 in your 2014 Ford F-150 with the tow package all you need is the correct install harness, part #22292. The #3035-P would not work for you so I cannot recommend it for you. To see how the brake…

view full answer...

Answer 7

It sounds like there might be some other fuses that could have blown, or there are some shorts on your brake controller/7-way circuits. It is hard to know exactly where the problem lies, but the first thing I would check would be to test the manual…

view full answer...

Answer 8

The Hopkins 6 Pole to 7 Pole Adapter, #47435, does have a pin for the brake output for a brake controller. This adapter will work for your set up as long as the center pin of the 6-way plug on your RV is for 12v power and the pin in the 10 o clock…

view full answer...

Answer 9

There a couple adapters which might work for you, the Hopkins #47435 6-Pole to 7-Pole or the RoadMaster #RM-146-7. I've left links to video reviews of both adapters for you to take a look at.

view full answer...

Answer 10

The blue wire of a 7-way runs to the blue wire of a brake controller to activate the trailer's brakes. If you don't have a brake controller or a need for trailer brakes you'd simply not use that circuit. I attached a diagram that has the…

view full answer...

Answer 11

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

view full answer...

Answer 12

The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can…

view full answer...