Do you Carry TruRyde 1.986-Inch Outer Diameter EZ Lube Drive-In Grease Caps
Updated 01/02/2015 | Published 01/01/2015
Products Featured in This Question
Question:
Do you have the 1.980 o.d.ez grease caps , code #RG04-040 ? thanks
asked by: Thomas M
0
Expert Reply:
Yes, the TruRyde 1.986-Inch Outer Diameter EZ Lube Drive-In Grease Caps (with plugs), part # RG04-040, are available from etrailer. These are sold as a set of two. We also offer driver tools to simplify installation, such as part # 290-992.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if I Have an EZ Grease Hub or a Standard Hub
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Hub and Drum Assembly for a 6x12 Car Mate Enclosed Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Size Dust Cap Does The Dexter Idler Hub DX77UR Use?
- Q&A: Can Lippert ABS 12" Brakes And Hubs Be Used On Equipment Hauler Trailer With Standard 12" Brakes 7K?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams