RV Sanitary Reducing Tee - 3" Lug x 3" Rotating Flange x 2" Hub
(0 reviews)
Price: $17.37
In Stock
RV Sanitary Reducing Tee - 3" Lug x 3" Rotating Flange x 2" Hub
Item # T1012
Retail:$41.25
Our Price: $17.37
You Save: 58%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Q & A (0)
- Videos (1)
- Photos
Valterra RV Sewer Hose Fittings - T1012
- Sewer Cross Fittings
- Tees
- 2 Inch Diameter
- 3 Inch Diameter
- Sewer Pipe to Waste Valve
- Bayonet
- Hub
- Valterra
- Rotating Flange
Sanitary tee connects to black-water and gray-water waste valves to combine them into one pipe. 3" Rotating flange connects to black-water valve. 2" Hub slides onto gray-water waste pipe. Hose connects to 3" lug fitting.
Features:
- Sanitary tee is part of your RV's sewer system
- Connects to both the black-water and the gray-water waste valves to combine them into one pipe
- T-configuration
- 3" Rotating flange bolts onto your RV's black-water waste valve
- Hardware not included
- 2" Hub slides onto your gray-water waste pipe
- ABS solvent cement (sold separately) required for installation
- 3" Lug fitting allows you to connect to bayonet fitting on sewer hose
- Bayonet-style cap (sold separately) covers lug fitting when not in use
- Sturdy plastic construction
- 1-Year warranty
T1012 Valterra Motorhome Sanitation Reducing Tee - 3" Bayonet Lug Fitting x 3" Rotating Flange x 2" Hub
Video of RV Sanitary Reducing Tee - 3" Lug x 3" Rotating Flange x 2" Hub
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Valterra RV Sewer - Connectors and Fittings - T1012 Review
Today we're going to take a look at the Valterra RV sanitation reducing T. It has a 3 inch bayonet end, a 3 inch rotating flange, and a 2 inch hub end. This reducing T connector is used in your black water system of your RV, reduces the 3 inch pipe down to a 2 inch pipe. This part is made of a durable ABS plastic construction. The 3 inch bayonet end, that's the end right here that has the 4 pins on it, those 4 pins on the tube will connect to either 2 or 4 hooks on your hose or your cap. When you put it on you just twist it for a nice secure connection.
Internal dimension on the bayonet end is 3 inches. We'll go over to the rotating flange edge. The rotating flange end, you can see, has a flange that rotates. This will allow your T connect to rotate to after this flange plate is connected to your attached to a connection. Basically you can see that it allowed the T connector to rotate. The internal dimension on the rotating flange end is also at 3 inches. On the flange itself, you can see it has the 4 mounting holes.
The distance between those mounting holes, if we put a ruler on it, center to center, is going to be right at 3 3/4 inches. The 2 inch end right here, this is a 2 inch hub end. It will have an internal dimension of 2 3/8 inches. That should do it for the review on the Valterra RV sanitation reducing T with the 3 inch bayonet end, the 3 inch rotating flange, and the 2 inch hub.
0
0
See what our Experts say about this Valterra RV Sewer Hose Fittings
- Availability of RV Reducing Tee with 2 inch Side HubSince you are wanting the # T1011 with a 2 inch tee on the side instead you would want the part # T1012 as this is same configuration with the sizes you want.
view full answer...
Info for this part was:
Installed by:
Jeff D
Written by:
Amy B
Updated by:
Mary K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.