Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug
(57 reviews)
Price: $46.18
In Stock
Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug
Item # T80
Retail:$64.66
Our Price: $46.18
You Save: 29%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (57)
- Q & A (0)
- Photos
- Why etrailer?
Valterra RV Waste Valves - T80
- Double Waste Valve - Manual
- Sewer Elbow
- 3 In Hub
- 1-1/2 In Hub
- Rotating Valve
- Valterra
RV sewer elbow combines rotating black-water and gray-water waste valves. 3" Hub slides over black-water line. 1-1/2" Hub slides over gray-water line. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose.
Features:
- RV sewer elbow combines a 1-1/2" waste valve and a 3" waste valve
- Can be used as a replacement part or upgrade your existing setup
- Elbow merges the flow of waste from your black-water tank and gray-water tank
- Rotating valves offer easy access at mounting location
- Position valves at desired angle during installation
- 3" Hub slides over your RV's black-water line
- 1-1/2" Hub slides over your gray-water line
- Bayonet-style cap covers lug fitting when not in use
- Integrated strap keeps cap connected to valves
- Durable black ABS plastic construction
- ABS solvent cement (sold separately) required for installation
- Gray and black handles for easy identification of valves
This RV sewer elbow with rotating valves is a part of your motor home's waste management system. The elbow combines the flow of wastewater from your gray-water tank and your black-water tank. And the valves can be rotated as desired during setup to make it easier to reach. Connect your sewer hose to the 3" lug fitting on the elbow and open the valves to drain your holding tanks.
T80 Valterra Motorhome Sewer Elbow w/ Double Rotating Valves - 3" Hub x 1-1/2" Hub x 3" Bayonet Cap
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug - T80
Average Customer Rating: 4.9 out of 5 stars (57 Customer Reviews)
RV sewer elbow combines rotating black-water and gray-water waste valves. 3" Hub slides over black-water line. 1-1/2" Hub slides over gray-water line. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose.by: Swishh12/06/2022
Very well made, heavy PVC, and screws to black and gray valves look like they will hold up well. Replacing 1997 Casita equipment which is deteriorating.
by: Bill04/21/2022
My experience was excellent. The online purchase was quick and smooth and I was kept informed during the whole shipping and delivery process. Based on this experience I will not hesitate to recommend etrailer to my friends!
by: Katherine05/22/2022
Customer service, Lori, was very helpful on the phone. She explained that like so many other businesses these days, they were short staffed- so even though the product was in the warehouse, it was schedules to take 9 days to pull the product, then whatever time it took USPS for standard land delivery. ( at which point I would have missed my camping reservation). So I paid the expedited shipping fee, which also sped up pulling it from the warehouse, and I got my product in 3 days as promised. Thank you.
by: Austin04/23/2020
Product works perfectly and is exactly as described. Seals are tight and had no issues with leaking or difficulty with getting the part into place. I would highly recommend. Had a blowout destroy the previous valve setup and etrailer's customer support was very helpful in finding us a part that would go right in. We were able to get back to rolling thanks to their help.
by: Tim 08/25/2022
Fit perfectly. Works flawlessly.
by: Steve04/06/2022
Just want i wanted perfect.
by: Jose 12/15/2021
Excellent part’s. On time. Reliable. Love it.
by: Jason S.05/06/2019
Excellent product!, had a little trouble on the install due to location being inside a compartment on my Fleetwood Discovery, but valves work great!
by: Ray-nm6r12/08/2019
I built a fully equipped toy hauler from a bare shell cargo trailer. This valve works perfectly every time. It was easy to install.
by: Bob K.08/11/2017
Had a leak needed the replacement part fast, going on a trip.
Who do I turn to? etrailer.
I had the new part in 48 hours.
Great service, great company.
by: Brian10/30/2017
Quick and efficient order processing. Got RV back in operation in time for the tailgate :-).
by: Sheryl05/17/2018
As always, service was great, shipment was prompt, and product was exactly what I needed! I love you guys--you are my first go-to when searching for a part for my travel trailer.
by: Joshua04/18/2019
Second order from e trailers and so far I can't complain as product is fast I went to campi g world to order this part and was told it would be 7 to 10 days for just the pipe itself without valves and total cost was going to be 40 dollars more haven't installed yet but I plan on it tonight
by: Michael04/05/2019
was looking local to no avail, found this on eTrailer and ordered was shipped and delivered very fast and was just what i need to fix the problem
by: Fernando06/02/2019
Excellent service from etrailer.com
by: David05/11/2020
etrailer is my "go-to-stop", always have exactly what i need, at the best price!
by: John07/07/2020
I bought these parts to replace a poorly done replacement on my 2015 Thor Axis. Don't know why the valve set was replaced by the previous owner, but I intend to do a much better job.
by: Jack08/29/2018
Product was exactly what I needed. Priced very reasonable. Delivery was prompt. Came just in time. I will shop etrailer every time I can.
by: William05/16/2018
Product got here on time, as predicted. Installation was very straightforward.
by: Michael M07/08/2019
Part arrived as promised and was of good quality, as far as I could tell. It replaced the original part, and holding up well so far, after an year in service
by: Carey09/02/2018
I received it quickly so I can get this changed out and our RV back in service. The one that is one is replacing had a crack and leaked.
by: Mark09/05/2020
Great product! Fast shipping. Very easy installation. Took about 10-15 to install.
by: Brook02/02/2019
Looks great, will be installing as soon as the weather gets a little better.
by: Keith 06/30/2021
Great product
25
56
Show More Reviews
See what our Experts say about this Valterra RV Waste Valves
- Replacement Double RV Waste Valves Recommendation for RVThanks for the picture. From that I can point you towards the correct valve setup to replace what's in it as part # T80A. But for the rest of the piping we won't be able to help you as we do not carry it. There are a few different variations of the valve though. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female)
view full answer...
- What are the Differences between Valterra Hub and Spigot Waste Valve Adapters T80, T80C, and T80AThe differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
view full answer...
- Difference Between Hub and Spigot for Valterra Double Waste ValvesYes, the info you listed is correct for the Valterra double waste valves. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female) Spigots fit into hubs.
view full answer... - What is the Difference Between Valterra Double RV Waste Valves # T80, # T80C, and # T80AThe differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
view full answer...
- Difference Between Valterra Double Rotating Waste Valve T80 and T80CThe difference is that the part # T80C has a spigot on the 1-1/2 inch side and the # T80 has a hub instead. A hub needs to mate to a spigot and a spigot mates to a hub. So you application determines which you would need.
view full answer... - Replacement for Bristol Dual RV Waste Valves V93B15Yes, the Double RV Waste Valves part # T80 is exactly what you need to replace the Bristol RV Waste Valves V93B15 that you have now. If you want to reuse your existing spigot flange then they will match up to those on the above as the four bolt flange has the same pattern. This will be a direct bolt-on swap for your trailer.
view full answer...
- 3 inch and 1-1/2 inch Hub Valterra Double Waste Valve for 2015 R-Pod 171Thanks for the picture of your valves! Based on that the Valterra Double RV Waste Valves # T80 is the correct part you need. This has 3 inch and 1-1/2 inch hubs that fit over the pipes on your camper like what you need.
view full answer...
- Dimensions Of Valterra Double Rotating Waste Valve # T80I went to our warehouse and took some measurements of the Valterra Double Rotating Waste Valve, part # T80 for you. I have attached a photo of the valve that has the dimensions you asked about. The distance from the end of the 1-1/2 inch inlet pipe to the end of the 3-inch inlet pipe is 10-7/8 inches. The distance from the outside to outside of the square face plates is 8-1/2 inches and inside to inside between the plates is 5-3/4 inches.
view full answer...
- Difference Between 3 inch Hub and 3 inch Spigot for Doulbe RV Waste Valve SetupsBasically the easiest way to describe it is that hubs fit over spigots. So the Double RV Waste Valves - Elbow - Rotating - 3 and 1.5 Hubs to 3 Lug Item # T80 that you referenced has a 3 inch fitting that is 3 inches in internal diameter designed for fitting over a 3 inch outer diameter (spigot) fitting. These kits do not come apart so you'd have to replace the entire thing.
view full answer... - Kit to Charge Battery of 2015 Chevy Equinox When Flat TowingYes, we have the Roadmaster charge wire kit part # RM-156-25 which gives you the needed wiring and breaker to run a power wire from the tow vehicle to the battery of your 2015 Chevy Equinox. I attached an install video for this kit on a similar 2016 Equinox as well.
view full answer... - Does Valve Assembly of Valterra Double Rotating Waste Valve # T81 RotateThe valve assembly of the # T81 can rotate. If you want to see the rotation possible check out the review video I attached for the very similar # T80.
view full answer... - Can The Drain Rotate On The Dometic Double RV Waste Valves?The drain itself on the Double RV Waste Valves # T81 can not rotate, however the valve can rotate. You can check out the product overview video showing # T80 rotating as # T81 would rotate.
view full answer... - Replacement RV Waste Valves for 2017 Thor Four WindsI do not have ability to pull a build sheet from the OEM to know what they installed at the factory. However, the Valterra Double RV Waste Valves, # T80A are known to fit similar Model RV's from Thor. Please compare this to current. If you are still unsure if this is a workable solution, please feel free to forward an image of current valve and any part numbers that you can identify.
view full answer... - Is Spacer Needed to Fit Double RV Waste Valves # T80A to 3-1/2" Inside Diameter OutletYou actually don't need a spacer to attach the Double RV Waste Valves # T80A to your current black water tank. Since you are measuring 3-1/2" for your outlet you have a hub. The 3" spigot end on this double waste valve has an outer diameter of 3-1/2" so it will fit perfectly in the hub of your current setup. In regards to the 3" measurement, that is actually the inner diameter of the pipe itself. If you measure past the hub fitting on your line you should see that it measures 3".
view full answer...
- Valterra Double RV Waste Valves Part # T80A Length From Spigot To HubThe Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3" Lug # T80A is 10-1/2" in length from the 3" spigot to the 1-1/2" hub.
view full answer...
- Is part # T80 all that is Needed to Replace Waste Sewer Valve on RVI spoke with my contact at Valterra and she informed me that the part # T80 is the complete valve assembly, including valves, flanges, and seals. The part is ABS plastic, so you could use an ABS sealant or glue. The glue is not included though. Part number # 0160297 will seal plastic parts and would work well for you.
view full answer... - Comparing the Double RV Waste Valves Part T80C and Part T80The difference between the Double RV Waste Valves part # T80C and part # T80 is that the former has a 1-1/2" spigot fitting and the latter has a 1-1/2" hub fitting. They both have 3" hub fittings as well. The spigot fitting means this will slide into the pipe and the hub fitting means this will slide over the pipe. The hub fittings are more common for the valves. In order to attach either assembly you will also need the Valterra ABS Solvent Cement part # A05-0303.
view full answer... - RV Grey Water Fittings with 1-1/2-Inch DiameterWe do have RV grey water valves and related items with a 1-1/2-inch diameter fitting. All connectors and fittings with this diameter are shown on the linked page; a second page showing valves like # T38 and # T80 is linked too.
view full answer... - What is Difference Between Valterra RV Waste Valves T80 and T81The difference is the connection the two valves make after the valves come together. The part # T81 uses a spigot connection for a permanent install and the # T80 uses a bayonet style fitting which allows for easier connection and disconnection.
view full answer... - How to Improve Access to Black and Gray Water Drain ValveThank you for the photo of the black/grey water drain valve on your Forest River Salem 31QBTS travel trailer. I see what you mean about this being well under the trailer and not located for convenient access. Sometimes the presence of slide out mechanisms or other RV features can limit the placement options for the waste valve. RV makers might choose to keep the drain well under the trailer to avoid a nasty problem were it to leak while you're driving. (Consider what would happen if a...
view full answer...
- Replacement Waste Valves Needed for a 2000 Fleetwood Discovery MotorhomeIt actually looks like you have the Valterra Double RV Waste Valves # T80. This comes with both of the waste valves already installed and they can be rotated 360 degrees on the elbows for ease of installation. We do have replacement waste valves but to know exactly what you need you would have to take your current system apart. If it all comes off as one unit then you can install the # T80. If it comes apart differently please let me know and I can help you find the correct replacement...
view full answer...
- Replacement Valves for the Double RV Waste Valves Part # T80You can replace just the valves on the Double RV Waste Valves part # T80. For the black water you can use the Valterra Bladex Waste Valve Body part # T1003VP and for the grey water tank you can use the Valterra Bladex Waste Valve Body part # T1001VP.
view full answer... - Is There a Single Waste Valve with 1/2 Inch Hub and 3 Inch Bayonet FittingsI do have an option for you but the Valterra Waste Valve for RV Gray Water Tank part # T1001 is not offered with a 1/2" hub on one end and a 3" bayonet on the other end as this is not a common waste valve setup. The best option for you with this is mind is to combine the gray and black water tank valves with the Double RV Waste Valves part # T80. The combined gray and blank water tank valves are becoming very popular because they make emptying your tanks very easy. The black water should...
view full answer... - Replacement Waste Valve Assembly for a 2007 Keystone Passport UltraliteI would love to help but I do not have any information that tells me what size drain pipes are on your 2007 Keystone Passport Ultralite so you will need to measure this for yourself. The standard size is 1-1/2" for the grey water tanks and 3" for the black water tanks. If this is what you have then you will want to use the Double RV Waste Valves part # T80. The grey water tank could also be a 3" diameter and if that is the case then you will want to use the Double RV Waste Valves part #...
view full answer...
Do you have a question about this RV Waste Valve?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate rv waste valve information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Dustin K
Installed by:
Cole B
Written by:
Amy B
Test Fit:
Kevin C
Video by:
Thomas T
Updated by:
Cody B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.