LaSalle Bristol RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug

See what our Experts say about this LaSalle Bristol RV Waste Valves

• Parts Needed to Allow Gray Water and Black Water to Dump From the Same Valve
  It sounds like you might want to have a look at the Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR, which would allow you to dump your black and gray water tanks from the same hose. This elbow fitting connects to the 3" hub on your black water drain pipe and the 1-1/2" hub on your gray water tank, and allows you to use the # F02-3112CL with your 3" spigot connection hose. You'll need to remove your old valves to install the Bristol Double...
  view full answer...
• Bristol Double RV Waste Valves Dimensions
  The distance between the 3" entry and the 1.5" entry on the Bristol Double RV Waste Valves # 34466ND13AAR is 10-1/2". I've attached a picture for you showing some additional measurements as well.
  view full answer...
  
• Recommended Replacement Sewer Valves for a Motorhome
  I have some great options to replace the sewer valves on a motorhome. The best one really depends on what exactly you have now. If they are combined or you want to combine them I recommend the Bristol Double RV Waste Valves part # 34466ND13AAR. If they are separate and you want to keep them that way then I recommend the Bristol Waste Valve part # 34466N11AB for the grey water and part # 34466N4BB for the black. I'm sure you'll need some various elbows and pipe etc. but that really comes...
  view full answer...
• How To Confirm Fit of Bristol Double RV Waste Valves
  The Bristol Double RV Waste Valves part # 34466ND13AAR is a universal double valve not specific to any one particular trailer. It would require the black water pipe to be 3" diameter and the grey water pipe to be 1.5" diameter but aside from that you won't have any issues although some misc. adapters and fitting are to be expected. In regards to installation instructions, these won't be available since it would vary by each setup.
  view full answer...
• Recommended Double Waste Valve Replacement For A 2000 Fleetwood Southwind Class A Motorhome
  No, the Bristol Double RV Waste Valves # 34466ND13AAR would not match what you have pictured, but you would be able to swap out what you have with the Double RV Waste Valves # T38C.
  view full answer...
  
• Direct Replacement For A Bristol Double Hub V93B15
  Product # 34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While # 34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the same outside diameter as pipe. The spigot fitting can be inserted into a hub or socket. The Double RV Waste Valves # T80 is a direct bolt on for your Bristol Double Hub V93B15.
  view full answer...
• Replacement Dual Waste Valve for Coachman Freedom Express
  Dual waste valves, such as the Valterra # TR38A, are nearly generic by nature. This one has the standard 1-1/2" gray water gate and standard 3" gate, and has a "Y" shape. You should also look at the Bristol # 34466ND13AAR Double Waste Valve that has more of a "T" shape, or the Valterra # T38. Compare what you have on your Freedom Express to these and one should be a match. Many of these connections will have been factory installed with solvent cement an will have to be cut off. Be prepared...
  view full answer...
• Replacement Bristol Double RV Waste Valves
  The Bristol Double RV Waste Valves, # 34466ND13AAR like most other waste valves in the industry, has a 3" hub to for black water waste and an 1-1/2" for the grey water. The main variances to consider when buying this or any waste valve is the construction and features. Does this valves shape/configuration meet the needs of what you are replacing or if retrofitting to a newer system will it match? Do the valve handles pull in the direction you need/want them to? and is the material it...
  view full answer...
• Bristol Double RV Waste Valve Elbow for 2006 Forest River Surveyor
  The Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR is made to fit 3 inch black water pipe and 1-1/2 inch gray water pipe. If you already have the valve face plate on your black water line this will connect to it and then on the capped gray water line you can simply use the included adapter with valve flange and the ABS solvent cement # 3447530889.
  view full answer...
• Replacement Double Waste Valve for 2006 Forest River Flagstaff
  Yes, since I was able to see a picture of your current valve setup I can tell that the Bristol Double RV Waste Valves # 34466ND13AAR that you referenced is exactly what you'd need. The valves of this kit will fit over the 1-1/2 inch and 3 inch pipes you have on your setup perfectly. I attached a review video for more info as well.
  view full answer...
• Replacement Grey Water Body/Seals for Bristol Double RV Waste Valves 34466ND13AAR
  The gray water tank valve on the Bristol Double RV Waste Valves part # 34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part # 34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part # T1001VP. If you just want the seals then that would be the Valterra Bladex RV Waste Valve Seals part # T1001-9VP.
  view full answer...
• Recommended 1-1/2 Inch to 3 Inch Sewer Wye Adapter
  The 1-1/2 inch pipe is standard for grey water, but not the black water line which is 3 inch. It sounds like you are looking for the connector. The Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR is a great option for this if you have both lines and just want the one outlet.
  view full answer...
• RV Black and Gray Waste Water Valve that Fits 1983 Shasta Freedom14.
  Thanks for getting me a picture of your valve setup on your RV. Based on that I can tell you that the part # 34466ND13AAR is the correct size and would work great as this is exact same size and design as what you have now. For more info on this check out the review video link I attached as well.
  view full answer...
• Correct Replacement Sewer Valves for Pleasure Way Lexor TS
  The correct replacement sewer valves for the Pleasure Way Lexor TS is the Bristol Double RV Waste Valves part # 34466ND13AAR. In regards to installation, you can reuse the outside flanges from your existing sewer valves so long as they are in good working order making for a bolt-on installation with no fusing required. That said, if the outside flanges are damaged they will need to replaced and new ones fused on using the LaSalle Bristol ABS Solvent Cement part # 3447530889. There should...
  view full answer...
• Replacing Valves Only On Bristol Double RV Waste Valves 34466ND13AAR
  In regards to the Bristol Double RV Waste Valves part # 34466ND13AAR, you can replace both the black valve section using the Bristol Waste Valve Body for RV Black Water part # 34439240 and the grey valve section using the Bristol Waste Valve Body for RV Gray Water part # 34439241.
  view full answer...
• Recommended Replacement Waste Valves For A 1998 Fleetwood Flair
  If you're wanting to only replace the valves then you just need the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VP and Valterra Bladex Waste Valve Body for RV Gray Water Tank # T1001VP. You can just unbolt the old valves from your setup and swap in these new valves for an easy peasy installation.
  view full answer...

Do you have a question about this RV Waste Valve?