This eccentric tank reducer converts a 3" tank outlet to an 2" opening for a gray-water tank. 3" Spigot mounts directly in tank outlet or slides into sewer pipe. 2" Hub slides over sewer pipe.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra Eccentric tank reducer. This unit mounts in the tank outlet to reduce the opening size for a grey water tank. It can mount directly in the tank outlet, or it can mount in a standard 3 inch pipe. It's made from a durable black plastic construction. On this end is the 3 inch spigot or male end. Inner diameter is going to measure 3 inches.
Outer diameter is 3 and a half inches. Again, this is the male end, so it would slide into the opening, and then you would need to use the appropriate glue to get it fully installed and secure. On this end is the 2 inch hub, or female end. This is going to give us an inner diameter of about 2 and 3/8ths. Outer diameter is about 2 and 3/4 of an inch.
That's going to do it for today's look at the Valterra Eccentric tank reducer.
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.