See what our Experts say about this Yakima Accessories and Parts

• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep Wrangler
  To use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• What is the Best Roof Rack Option for a 2002 Mercury Grand Marquis?
  Yes, the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B is the best option (and currently, the only option) for you. The Monkey Bars has one of the easiest installations of any roof racks we carry. In addition, the Monkey Bars have a total weight capacity of 150 pounds to give you plenty of capacity to transport cargo and accessories on your 2002 Mercury Grand Marquis. To carry your accessories, you might not be able to transport your kayaks, bikes,...
  view full answer...
• Looking For Roof Rack System For High Roof Camper Shell
  Hello Bryant, thanks for reaching out. We do offer a roof rack system that will work for your high roof shell. It will involve mounting a pair of tracks on the roof, then the roof rack towers install onto the tracks. Here is what I recommend: - Yakima 42" Tracks for Roof Racks # Y01126 - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Yakima JetStream...
  view full answer...
• Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks
  Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
  view full answer...
• Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NTB with 54 inch long bars but...
  view full answer...
  
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Can the Yakima Tracks for Roof Racks Be Trimmed
  I can't see why you wouldn't be able to cut the Yakima 54" Tracks for Roof Racks # Y26RR if need be. As long as you're able to cut it cleanly to where the end cap would fit back in place as it was before, you'll be good to go. We also have shorter tracks, # Y01126, which are 42" long which might be better suited for you.
  view full answer...
• Will Thule UpRide Bike Rack Fit T-Slot of Rhino-Rack Vortex Crossbars for Track Mount System
  Yes, the Thule UpRide # TH599000 will fit the T-Slot channels of the Rhino-Rack Vortex crossbars. The Rhino-Rack tracks don't have extra end caps available but I do have another solution for you. I confirmed this with my contact at Rhino-Rack. The Yakima tracks, similar to the Rhino-Rack tracks, do have replacement end caps that will allow you to easily do what you are wanting to do. The Yakima tracks come in 3 different lengths; 42" # Y01126, 54" # Y01127, and 60" # Y01135. You will just...
  view full answer...
  
• What are the Replacement PlusNuts for the Yakima Roof Rack Tracks Made From
  The Yakima PlusNuts replacement part # Y8880039 is the optional hardware kit for Yakima roof rack tracks # Y01126 (42 inch) and # Y01127(54 inch) and are made out of steel. The roof-rack tracks are an anodized aluminum so you wouldn't have any issues using other types of metals.
  view full answer...
• Replacement Hardware for Yakima 60" Roof Rack Tracks
  The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039. For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.
  view full answer...
• Do Yakima Tracks Need Yakima Feet & Crossbars
  Yes, you will need to stick with Yakima when installing the Yakima 42" Tracks for Roof Racks # Y01126. You will also need the TrackTowers for Yakima Crossbars and Platforms # Y52AV.
  view full answer...
• Can Yakima Tracks Work on Truck Cap and Roof
  You can add the Yakima Tracks for Roof Racks, which come in 60" # Y01135, 54" # Y01127 or 42" # Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck. If there is a space between them you wouldn't want to install just the two tracks per side as that wouldn't be fully secure. As for the rivets showing, they won't specifically, but the CapNuts in the hardware would show because you need to drill through...
  view full answer...
  
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• Can Yakima Tracks for Roof Racks be Slightly Bent During Install on Tear Camper
  I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks # Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and round bars like the 58 inch # Y00409, 66 inch # Y00410, or 78 inch # Y00411, depending on the size of your camper's roof.
  view full answer...
• What Part Of Roof To Install Yakima 42" Tracks for Roof Racks On 2001 Ford F-350
  I was able to find the video you are referring to of an installation of part # Y01127 on the 2004 Ford F-250, our installer does attach the tracks closer to the door because that is the strongest part of the roof. I have attached that video. I contacted Yakima and they said the tracks can be installed anywhere on the roof of 2001 Ford F-350 that works best for you but we like to install them closer to the door for stability.
  view full answer...
• Are There Landing Pads Available To Mount Yakima Q-Towers To An A.R.E. Truck Topper
  I reached out to Yakima and was informed that there unfortunately is not a compatible landing pad for Q-Towers available so the only way to mount your Yakima crossbars would be to also get new towers. You would also need some tracks to mount on the roof of your A.R.E. Truck Topper to have something for the towers to mount to. We have the following track sizes available: 42" # Y01126 54" # Y01127 60" # Y01135 Since you have Q-Towers I'm assuming you have round bars and would need four...
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Yakima Roof Rack Option For MyPod Trailer
  There isn't anything specifically designed for a 2014 MyPod trailer, but you can add a Yakima roof rack so long as you have the space. What you will need are to install tracks, and then the rack will fit directly in those tracks, which you can do with the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima Control Tower # Y8890027 (Quantity of 4) - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - Cap Nut Hardware # Y8810155 - Round 58" CrossBars for...
  view full answer...

Do you have a question about this Accessories and Part?