Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the damaged aluminum gearbox for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement aluminum gearbox for Stromberg Carlson landing gear. This will replace a damaged aluminum gear box on your tandem landing gear with this part from Stromberg Carlson. It is designed for use with the Stromberg Carlson LG1 and LG183708 landing gear, but it will also work with other brands of landing gear, including Atwood, Lippert, and Venture. This is constructed of a durable, rust-proof aluminum. Just to give you some measurements on this, the widest point this way is going to be right at five and a quarter inches, the widest point this way is going to be right at about six and one eighth inches, and the widest on the aluminum gear box itself is about seven eighths inches. Another measurement, if you measure rod to rod, to the end of each rod, you're looking at right at about seven inches. That should do it for the review of the replacement aluminum gear box for Stromberg Carlson landing gear.
Once installed the gear box seems to work fine but I’ve only used the camper a couple of times since . I had to file that shaft down in order to get it to fit in the jack housing . Contacted the salesman and he was going to get back to me after consulting with a second party but never did and I was unable to contact him
The original one was plastic and it broke an alignment holder off, this aluminum one should last longer.
Great customer service!
This Aluminum landing gear box is the best, heavy duty looking, the original was made of plastic and cracked. I still need to install the new gear box and I will give you an up data after installation. Thanks George for the emails and fast shipping. The photo is of my old gear box that has cracked at the bottom.
Working great in my 2007 Vortex Toy Hauler. Replaced the Plastic Version
Easy install took about 20 minutes, worked great.
Seems to be working well. Only dropped it. But it’s working better than the plastic one.
This replacement gear box was a perfect fit for my original. In order to remove the old gear box the shaft will require rebutting. The new gear box fit the shaft with no problem.
worked great thanks
This product is exactly the same as my stock one except it's made out of aluminum and a lot stronger. Easy to install - 5 screws and a cotter pin.
Works exactly as needed, installed very quick thanks in part to a you tube video. This part was 30$ cheaper then the plastic replacement and what should of been used by manufacturers.
Very pleased with your service and sales person. Will remember where to purchase replacement parts.
Exact match for what came off my 5er except this one was metal and not missing a corner. Unbelievable that the factory would use a cheap lightweight plastic piece of garbage to do a high-torque job but this is the perfect replacement. Now I just need to remove each landing gear leg and clean, lube , and/or replace parts as necessary to prevent trashing my new gearbox. Another factory fallacy: lifetime lubrication. Hah! Everything mechanical needs lube and your landing gear is no exception. My only complaint is I paid for 3-day shipping but didn't realize it was 3 business days and received my gearbox 8 days later because of a weekend and the TG holiday. No one's fault but my own, live and learn.
Paula was very helpful with everything I needed.
I purchased this to replace the "composite", read junk plastic gearbox from Atwood. My local RV stores wanted $100 for the junk plastic one. One store said they can't keep them in stock ever since Atwood changed them from metal to "composite" read cheap plastic. I found this aluminum gearbox to be sturdy and an exact replacement for the existing one. Where the plastic one would flex and the gears would slip when lifting my 16,000 trailer, this one is sturdy and just works. Thanks for a cost effective replacement.
Jeff L.
3/11/2014
While I have not used the trailer a great deal, the product does seem to be working as designed. Thank you for the follow up.
Garry
8/11/2014
Wow was that ever easy and simple to install new Geary on front legs Thanks
The gearbox I ordered arrived in good shape. Andrea made sure I had the right one before purchasing, and it was an exact match for my broken gearbox. The product arrived on time, and helped me get my camper back on the road. Though the the gearbox in the picture (and my broken gearbox) are black, the one I received was not painted. Hardly an issue, but thought it was worth mentioning. Thanks etrailer, great service again!
Mike C.
10/17/2016
Its been a year and the gearbox is holding up well. I think in this instance the best compliment I can give is that I dont ever think about the gearbox when running the landing gear in and out. This repair forced me to learn how to gain achess to the leg bevel gears and where to apply grease. Armed with this knowledge, I expect my new gearbox to provide many more years of service.
Great part, purchased as a back-up.
Excellent service and the advice of the tech, Michael, was outstanding. He gave me several options I could use to replace my gear box. I am currently trying to resolve a continuing problem with my landing gear and will use this service again and for any future issues. Thank you for all your help.
Tim O.
4/29/2015
I could not be happier with how my new landing gears are performing. The landing gears are continuing to perform like new. I will definitely use etrailer again for any parts I might need. They are on my favorites list for quick and ready access.
I would like to complement the folks at etrailer for a job well done.
I recently purchased two gearboxes # LG-179015 and a motor # LG-196308 for my Keystone Cougar fifth wheel.
Your people were very helpful at helping me be sure I was ordering the correct parts and got them to me in just 3 days, and the prices were extremely fair.
Installation was a piece of cake and it works better now than when it was new.
I have purchased from etrailer before and will continue to do so in the future, definitely a " one stop shop " for trailer parts.
Thanks for everything !
Spoke to William B. at e-trailer and told him my landing gear was skipping or jumping sometimes as I raised the 5th wheel up. I had already put a new electric motor on because the other got hot quickly. William diagnosed the problem as the gearbox. He sent one out quickly as I had plans the next weekend. After I put the gearbox on it, I raised it several times and it works great. Thanks William and e-trailer for your help and quick processing.
I contacted three local trailer parts supplier trying to order A landing gear gearbox for my fifth wheel trailer. No luck, never had enough information for them. Call etrailer And talked to Will who knew exactly what I needed. Receive the part had it on in no time and was back in business. Outstanding job well thank you.
Called looking for a new part for an old trailer. Rep was very helpful through the process and took the time to talk to one of the techs to determine if the new part would fit my 5th wheels landing jacks. Part arrived quickly and installed with no issues. I will shop here for now on.
One week ago my 5th wheel landing gear broke. Today it is up and running thanks to Etrailer. I would not have been able to do it without the help from Lisa, Jennifer, Jameson , John and others through emails and half a dozen phone calls for technical help. I will definitely buy from etrailer again. Replaced both legs, cross-shaft, and gearbox.
Were hearing an issue with one of our Lippert Ground Control 2 leveling jacks. This went away after cleaning and reassembly but decided to get a gear box on hand as it will fit any of the 4 jacks.
Could not find the gear box on ET but Lori B., our sales associate, was able to find the correct part using the Lippert part number. She is great and very helpful. This is an aluminum housed unit instead of the plastic housing used originally. Wish ET sold the bushing (nut) and screw that hold the motor and gear box onto the leg.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Malaqua
12/9/2017
The gearbox worked perfectly and is what the factory should be putting on when new but you know how that goes. I have since sold my trailer but the gearbox was working as it should. I ended up replacing one landing gear leg should have replaced both but the gears were in fine shape that caused the problem with cracking the original gearbox and since then had no more problems. Thank you for caring enough to send this email, as I know customer service agents are busy and most companies just dont take the time to reach out to customers after the fact. I have learned that etrailer is the premier site to go to for trailering issues and have used your site for wiring problems and mechanical issues alike. Thank you for providing the rv customer with a great resource to go to for much needed info and parts. I have and will continue to recommend your site to those in need.