Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting your trailer level makes every haul smoother and safer. This Curt Class I drawbar can be flipped to give you either a 5/8" rise or a 1-1/4" drop, depending on what you need. With both options built in, you can easily match your trailer height for steadier tracking and better control on the road.
Built from sturdy steel and finished in a corrosion-resistant black gloss powder coat, this mount stands up to weather, dirt, and road salt. The CNC-machined cuts and welds keep it consistent and strong, while the 7-stage washing process leaves a clean surface that helps the finish hold up over time. It’s made for long-term reliability, trip after trip.
Rated for up to 2,000 lbs gross towing weight and 200 lbs tongue weight, this drawbar is ideal for smaller trailers or utility hauls. It fits any 1-1/4" x 1-1/4" trailer hitch receiver and uses a 3/4" ball hole diameter, giving you a secure, straightforward setup for light-duty towing jobs.
The fixed ball mount design keeps things simple—no moving parts, no adjustments to worry about. Its 9-3/4" length from the center of the hitch pin hole to the center of the ball hole provides a clean fit that stays steady while towing. Just attach it with your choice of hitch pin and clip or a lock (sold separately), and you’re ready to go.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
The fit is perfect and now my trailer will run level. It should make for a better ride.
Good craftsmanship and finish. Perfect fit. Exactly what I expected.
e trailer was easy to order from and delivery was very timely.
C45019 Will be used with my short Harbor Freight trailer for lawn mower.
C45024 will be used on a stripped down boat trailer to haul 12' kayak.
Great quality, low price. Thanks a big bunch for the super fast shipping!
Needed a stinger for my ATV to move a dump cart. Can't go wrong with Curt products.
Great communications and FAST shipping, and the price was right!
All GOOD!!!
Staff was helpful and knowledgeable. Service was great. I would order from etrailer again
Quick easy installation when less than an hour and a half basic tools little different than the video cuz it was a little bit different of the year but still just as easy looks great on the car highly recommended
Receiver insert made of square tube and the drop part of solid steel stock.
Had to machine down and repaint to fit hitch. Poor control by hitch or mount manufacturers. Still great etrailer service.
Every thing about the product was as shown. Just was surprised the pin to attach to the existing mount was not included. Just assumed it would be with hitch because it will not work without the pin. Now have to make a trip to find a pin.
Loved the hitch looks good on the Accord! Installed the hitch in 15 minutes, spent two hours on the wiring. Ordered with the European ball, very sexy!
I have ordered from Etrailer in the past an once again a superior job shipping was on time products came neatly packed and still looked in the new condition one would expect to see once again awesome job everyone
Fast delivery. Though the square tube walls where thicker Like Resse hitch receiver is. But it should be fine. The people at Curt know how to produce a item that can meet the requirments for the purpose its intendent to. My spelling is not the greatest.
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
I'm giving this company an excellent review. We received our product and one part of it was 1/8 of an inch from fitting properly. I called customer service and the lady I spoke with was very helpful. They went through all the hitches like this that they had and figured out the problem. She sent me a new one free and it worked great! Thanks for the awesome service!
I always find what I need at etrailer! They sell top quality products and always ship fast.
Thanks!
Getting the rectangular washers and their bolts into the proper place in the framerails... an hour and a half. Mounting the hitch and trimming the heat shield...ten minutes! Couldn't have done it without the guide wires.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
I ordered a receiver for my Honda Civic and got a great price, I received my order in 3 days and was able to install it without much hassle by watching a video on YouTube. I then ordered three more items. I needed them in 3 days so I could pick up the trailer I wanted to buy. I received all the items in time. Unfortunately I found that I had got the wrong wiring harness. It turned out ok because I was able to pick up my trailer before nighttime and when I called Emily to ask about the mix up she simply emailed me instructions to return the wrong harness and I am now ordering the correct one. So far they've made everything easy and at a good price. I'm very pleased.
All the items in my order arrived today. Thanks for your continued follow-up on this order and the speedy shipping once you had the item on hand. I also appreciated the installation video and pictures on etrailer. com. I routinely recommend that my customers reference your website for install instructions and product explanation videos. Keep up the good worK.
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
very good product and easy to install thank you very much I recommend this product and by the way the service is very good thank you
Just what the doctor ordered. Have not welded hitch up yet, however, the arts that I needed are what I received. Prompt service, shipping and due to accuracy of description- perfect and thank you all involved.
Bigdick
8/13/2016
After welding receiver and installing on bike. Have towed trailer several thousand miles with no problems. Thanks again for the great parts and follow up to make sure I am still happy
This is the second hitch I have purchased from etrailer and, again, it was a perfect fit. Everything I buy from here is exactly what they say it is and exactly what I was needing.
I will always recommend etrailer, they have never let me down.
Gene
Houston Texas area.
Gene
4/13/2018
All is good. All products are performing as expected and wanted. As usual I am more than satisfied with every product I have purchased from you. I also suggest to others they buy from you asbI have always had good experiences.
I purchased two drawbars for my Polaris ATV. Good quality and very fast shipping from etrailer.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Blake T.
7/16/2017
Still working great!