To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hitch will fit with full size spare tire stowed under vehicle unless spare is on an Aluminum rim, which is too wide. No drilling through vehicle frame required for installation , Trimming or removal of underbody panel required for installation , Fits Hybrid models as well
California residents: click here
Complete Towing Package for 2019 Suzuki GSX-R
Popular GSX-R Trailer Hitch Accessories
This was my first time installing a hitch. Thank goodness etrailer was able to identify a potential problem before it occurred --the RX350 and RX350L require different hitches, and I almost bought the wrong one. Etrailer's followup was also great. My only complaint was that the instructions didn't match up perfectly with the actuality of the situation. It would also have been helpful to know the exact tools needed before I embarked on this project (most notably the Dremel that was required for cutting away parts of the trim on the underside). It also wouldn't be terrible if the package included a few extra plastic snaps to replace the ones that are inevitably damaged when you have to remove trim.
This hitch does not clear the bracket holding the pre wired connections for trailer lights on my Lexus RX350L. It is located passenger side above the exhaust outlet. The bracket is factory installed. I am using this for a bike rack so I removed the wiring connection from the bracket which allows the bracket to be pushed up enough to correctly bolt the hitch on.
Ray K.
10/11/2024
After a year it works perfectly as I expected. It is a quality hitch and Etrailer stands behind it. Thanks
The hitch and wiring harness fit and installed very easy. Excellent video instructions to install.
This product is amazing! Completely changed our ‘20 Lexus RX450hL into a true SUV. We carry our e-bike with us now using the hitch and plan to buy a cargo platform soon
The install was easy but required two persons. The instructions were very good. For those with the Lexus RX 450hL, this hitch fit like a glove. Now I can haul my two eBikes with ease. Thanks etrailer!
Allan
8/17/2022
Looks like an OEM hitch and functions well. We take our bikes everywhere we travel. Don’t pull a trailer, but for us this hitch put the U back in SUV for us. Anyone who has a 2019 450hL with the spare tire underneath the back, this hitch plaits like a glove using the existing tapped and threaded holes. Good job Curt!!
Great for my bike rack and hauling my bikes around on my 2020 Lexus RX350L. I wanted the 2” inch receiver for my heavy duty Yakima rack. Instructions were slightly unclear about how much of the bumper facia had to be trimmed. I had to trim the plastic bumper facia the entire length of the receiver. Also, two of the brackets between the frame and bumper had to be removed to allow clearance for the receiver. A lot more modification of the bumper and brackets than I expected. The good news is you don’t see the trimmed plastic when you look at the car. The other downside is that you lose the kick sensor to open the hatch. It get blocks from the receiver. I am trying to see if I can move it or trim more plastic to expose it. The overall appearance of the receiver is nice from normal view. You only see the receiver which is very nice, looks like factory. Have another strong person helping you with the installation and all will be well.
Took it to Florida and back with a Thule bike rack attached. Still seems solid. Installed it myself with another person to help hold it up under the car during installation.
A few weeks ago I installed the Curt C13394 hitch from etrailer.com on my 2020 Lexus RX450hL. etrailer and Curt don't seem to know that this hitch which is meant for the 350L does also fit the 450hL but it fits perfectly. The install was fairly easy, I did it all myself except I had my son help me to lift it into place and get the first few bolts in place. The videos on etrailer are helpful, but there isn't one for a Lexus RX for this hitch. However, there is one for another hitch that installs very similar, so suggest watching the Lexus RX350L install video. The biggest task was probably cutting the driver's side panel to go over the hitch since they don't give you a template or anything. What I did was pushed it into place to see where it hit the hitch and then tried to just trim the minimum amount necessary with a Dremel and a cutting blade. The second picture shows the panel after I trimmed it and re-installed it. The third picture is the front part of that same panel to show where I trimmed it there.
I won't be towing with this vehicle so I only installed the hitch and didn't bother with the electrical hook up. I just need it for a bike rack and possibly a cargo carrier. Most of the time I only need to carry one bike so this will allow me to have a small single bike rack most of the time and I can add room for a second rack only when I need it.
I'm very happy with this setup. Attached are some pictures.
I am very happy with e-trailer as a company, shipping was good, the installation went smoothly, and I appreciated all the resources. The hitch functions as expected and hoped for - so 5 stars worthy on all these aspects.
My only concern is that after only one year, rust has developed (see photo). True, we are in the midwest, but we had an extremely mild winter with little to no snow or salt this year, and we always keep our vehicle washed and garaged. I didn't expect to see rust already this soon.
First of all this is my fifth or sixth purchase from "etrailer.com" their prices cannot be beat!! Thanks for that. This hitch was installed on my "new to me" 2018 Toyota Highlander Limited. As a very qualified Toyota tech was doing the install, we did not exactly follow the video instructions that were for a 2019 and 2017 (attached to my order). Anyway the install was clean and well done, the large "tab" over the exhaust was cut/trimmed away. The other two small arms/tabs were NOT removed and added to the clean install. My only issue, would be that there was no "retention" port/plug for the 4 pin wire harness, so it hangs free. See pictures. Otherwise very happy. thanks again etrailer.
Overall not too bad of an experience. All hardware was included so no problems there. Only issues I had were it needed a bit of muscle to get to fit perfectly with holes of highlander frame. After getting it mounted, it was a bit difficult to find the proper torque specs for this model. For us simpler folks, a small paper with simple instructions/specs could be useful. Build seems sturdy and made with quality materials.
This is my second hitch purchases from etrailer. I would have given 5 stars however, like noted in some reviews my hitch too was bent, almost a inch off. The best way I found to bend it back in shape is use two 4x4 post pieces and a hydraulic jack, used from my Yukon.. Otherwise it is only a 30 minute job to install. I recommend, since this seems to be a issue from time to time, is place either a 1x1 or 2x4 or other ridged device to ensure the hitch maintains its shape during shipping. You guys have great vids showing how to install. Highly recommend your products.
Thank you...
Fit perfect. Easy to install.
Thomas
2/2/2026
Still awesome after one year.
Gwendolyn Y.
2/3/2026
Looks to be very good quality. Installation was very easy with the included instructions.
This curt hitch fit my 2022 RX350L. The six holes in the hitch were mostly aligned, although it did require use of a crowbar to open the hitch slightly for the last two bolts. The install took under an hour and I am pleased with the result. At some point I may add a wiring harness too.
Excellent trailer hitch for the 2016 Toyota Highlander. I use it for hauling Jet Ski's. Installation was easy while using a jack and a bucket to hold it up for me.
Installation was not a challenge on my Lexus RX350L- the hardest part, by far, was removing all the driver's side fascia connections. My son did help me lift it into place while I initially placed the bolts, so I recommend getting help for that. Looks great - thank you, e-trailer!
This is a great hitch. I was able to install it very easily with the instructions provided. The hitch fit for my vehicle was spot on. I'm using the hitch for baskets and bike mounts. It has been working great for them. The whole installation process was very fulfilling.
The hitch appears to be very solid and the crossbar is concealed behind the rear bumper. The bolts supplied are about 1/2” shorter than the Lexus bolts that are removed prior to installing the hitch. I ended up reusing 4 Lexus bolts and only 2 of the new supplied bolts. The supplied new bolts were just too short to get the bolts threaded into the bolt holes. I’m an experienced DYI’ er and the install took me 4 1/2 hours. Way more than the 1 hour they claim a Novice can do the install. I did the install by myself so I expected it might take more than an hour. I would buy the hitch again
Installation was straightforward and video was helpful. Having some helping hands and the proper tools makes the job great for the do it yourself person.
Hitch was damaged a little during shipping. No big deal just a few scratches given the weight and everything. Other then that works perfectly fine
Looks great on the car. I like that you can pretty much only see the receiver, where on some other models you can see the tubes. I wanted to go OEM, but couldn’t justify paying more than double.
Installation videos were very helpful. There was a little challenge getting one of the six bolts on. I tried spreading the arms a little, but didn’t have much luck. I found the after getting a bolt, loosely, in each side, then installing the rest on the passenger side, I could use a ratcheting clamp to get a enough play to install the last bolt (driver’s side toward front). I then went back and torqued all to spec.
Please excuse the dirty car in the pics.
Added this to my new to me 2015 Highlander Limited. I really liked because it is really hidden under the car other then the receiver. The first one came and it was bent, so it did not line up with the holes in the frame. Contacted etrailer and they quickly sent a new one, which installed perfectly. So other then that glitch, it was a perfect experience. Would highly recommend this product.
Hitch arrived a day earlier than estimated. Thanks to etrailer’s tracking link, and a video link showing installation, I was able to prep the undercarriage for installation before the hitch arrived. A bit cumbersome but I was able install the hitch by myself. Only issue I had was that one of the bolts wouldn’t line up without using some leverage to spread the hitch’s support arms. Total install time was around 1 hr. This is the second hitch I’ve purchased from etrailer and installed. Both have been relatively easy installs. I’m a happy customer
I had previously purchased an a trailer for a Ford edge SEL 2011
Well, that trailer hitch only fit on a Ford edge or are there other vehicles it can be installed on
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jessica
3/8/2026
Going strong! We carry a bike rack 247365 on this hitch. It even got hit in an extremely minor rear-ending incident and I accidentally backed it into a snow bank, and the hitch is going strong.