Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hub-and-drum assembly fits most 7,200-lb, axles manufactured after 1999, with a 4-bolt brake flange. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Dexter 12 1/4 inch Trailer Hub and Drum Assembly with the 8 on 6 1/2 inch bolt pattern. Has the 9/16 inch diameter wheel studs, and it's for the 7,200 pound axles that are manufactured after 1999. Now this trailer hub and drum assembly provides the surface area for your brake shoes to grip when your brakes are activated. If you look in the back here, you can see here's the area where your hydraulic drum brakes will apply, and then if you use electric brakes, they'll apply right on here.
So it is compatible with both electric and hydraulic drum brakes. It is a sturdy iron construction, and this part number does include all these parts here shown on the table. Let me just get this back up here. There we go. It'll include the hub and drum assembly itself.
It includes the bearing races, which are pre-installed. The outer and the inner bearing races are pre-installed. Comes with the inner bearing. The outer bearing comes with the grease seal, the grease cap, and then eight of the 9/16 by 18 size lug nuts. Now the part numbers for these bearings and grease seals and cap, they're all listed on the bottom of the product page of this part number.
Drum dimension. The diameter, gonna lift it up again just to show you, but that diameter if we measured across, is gonna be 12 1/4 inches. The width is gonna be from here to here, 3 1/4 inches wide. Now it is designed to work with the brake assemblies that are 12 1/4 inch by 2 1/2 inches wide. Application again.
This will fit 7,200 pound axles that are manufactured after 1999, and the reason that is after 1999, they upgraded from a 9-bolt brake flange to a 4-bolt brake flange, and they don't interchange. So this is designed for the axles that we're manufactured after 1999. Bolt pattern, we mentioned, is an 8 on 6 1/2 inch bolt pattern. It does accept the wheel size of 16 inch up to 17 1/2 inches. Wheel stud diameter of 9/16 of an inch, and the weight capacity on this one, assembly is 3,600 pounds. So when this is matched with one on the other side, it meets the 7,200 pound rating of your axle. But that should do it for the review on this Dexter 12 1/4 inch Trailer Hub and Drum Assembly with the 8 on 6 1/2 inch bolt pattern, 9/16 wheel studs for the 7,200 pound axles manufactured after 1999.
Average Customer Rating: 4.6 out of 5 stars (21 Customer Reviews)
This hub-and-drum assembly fits most 7,200-lb, axles manufactured after 1999, with a 4-bolt brake flange. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Spectacular all around!! Part came in time and all was perfect. Phone help was wonderful and super helpful!
Very pleased with the service and prompt delivery only thing was I only got 7 lug nuts instead of 8 and the studs aren’t really long enough because the studs don’t come all the way out of nuts
This is been a great hub for my trailer.. I have had no problems with it and it has had to have zero maintenance.. it was fairly easy to install, And etrailer was great to deal with..Tera my rep fixed an issue for me and made it all work..thanks
The first one that was sent to was wrong stud size I called they sent a different one still wrong I had to remove old studs my old hub and use them on the new one I can't wait for another week for a new one to be shipped to me
Just what I expected and real fast shipping. Quality merchandise packed well for shipping.
Low price for top quality and great service thank you I get my order fast
Good fit and it had everything I needed included.
Very helpful with the Oder process, got it to me with no problems.
Very fast delivery Thankyou
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
12/22/2021
I will have our customer service team reach out to you.