See what our Experts say about this Jif Marine Trailer Winch

• Replacement for Shelby Boat Winch
  Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is generally 2-to-1, I recommend checking out the Single-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W2000D. This winch has a 2,000 lb capacity, has a self-locking crank and is zinc-plated so you do not have to worry about it getting corroded.
  view full answer...
• Replacement Winch for a Shelby Industries Hand Winch 54073
  The closest option we have to replace your Shelby industries hand winch model 54073, is the 2-Speed Boat Trailer Winch item # 315-W2000D you were looking at. This 2-speed, manual ratcheting winch has a 2,000 lbs capacity. It includes a 20' long x 2" wide strap with a latching hook.
  view full answer...
• Availability of Winch Similar to Fulton # F142306 that Has Freewheel Handle Position
  Hey Mark, the Fulton winch part # F142306 that you referenced does not have a freewheel position. Instead we have the similar Jif marine winch part # 315-W2000D that does. The middle position does allow it to free wheel but it does spin the handle as the strap is fed out.
  view full answer...
• What are the Dimensions of the Jif Marine Single-Speed Boat Trailer Winch Mounting Holes?
  The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake item # 315-W2000D are 2.5 inches apart center to center. The attachment point to the center bolt is a slot that is 3.5 inches - 5 inches above the center of the bottom bolt holes. I have attached a diagram with measurements of the mounting holes.
  view full answer...
  
• Are Replacement Parts Available For The Older Fulton T1200 Hand Winch?
  Unfortunately there are not any replacement parts available for your older Fulton T1200 winch aside from Replacement Handle for Fulton Hand Winch - 9" # F501109. While I'm sure this is not the news you were looking for, I will give you my recommendation for a replacement if you decide to go that route. An affordable replacement would be Single-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W2000D. This is rated for 2,000lbs which is higher than your current winch. It also has...
  view full answer...
• Recommended Hand Winch for 2200 lb Boat
  Although the # 348776 you'd looked at would do the job, going with a winch that has a higher capacity than what you actually need is a good idea. The winch won't need to work as hard. With this in mind, I'd recommend the # 315-W2000D from JIF Marine. The extra capacity will be helpful when you add the weight of the cargo like skis, fishing gear, coolers and gas. Normally, with a short winching distance, you could get by with a 1100-1500 lb capacity winch, but going with a winch with a...
  view full answer...
• Base Dimensions of Single-Speed Boat Trailer Winch part # 315-W2000D
  I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part # 315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.
  view full answer...
  
• Replacement Handle for Dutton-Lainson Hand Winch DL1100A
  While there is a replacement handle for your Dutton-Lainson Hand Winch # DL15103 (which is model DL1100A), the Replacement Winch Handle # DL5703657, a different handle will not give this winch a ratcheting mechanism. For that you would need to replace the winch entirely with the Single-Speed Boat Trailer Winch # 315-W1800D which has a ratcheting hand crank. This winch comes with a 20' strap and has an 1,800 lb capacity, though there are other capacities available: 2,000 lbs # 315-W2000D,...
  view full answer...
• Comparing Fulton 1,500 Winch and JIM Marine Winch # 315-W2000D
  Fulton makes high quality winches like the Fulton Winch # F142201 that you referenced. JIF Marine makes great winches too and the Single-Speed Boat Trailer Winch # 315-W2000D is almost an identical design except for it comes with a 20 foot cable and a strap included. Based on that I would go with the JIF.
  view full answer...
• Dimensions of Base of 2,000 lb 2-Speed Boat Trailer Winch with 20' Strap # 315-W2000D
  The base dimensions are indeed 6-1/4" long x 3-3/4" wide for the 2-Speed Boat Trailer Winch with 20' Strap - 2,000 lbs # 315-W2000D.
  view full answer...
• Replacement Suspension and Winch Parts for CE Smith Multi Sport Trailer
  I can help you out with some of those upgrades, but not all of them as we don't have all of the parts to do what you're wanting to do. To replace the leaf springs, upgrade the tires, and replace the winch stand (if that's the case) and winch on your CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks # CE48810 you'll need the following: - 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles # e36SR (2 of these) - Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel...
  view full answer...
• Recommended Hand Winch for 3K Boat and Trailer
  I do recommend using a brake hand winch for a boat trailer. The Single-Speed Boat Trailer Winch part # 315-W2000D is a great cost effective option with included strap and brake. It also has a neutral freewheel so you can let line out without the handle spinning.
  view full answer...
• Fulton T-1401 Replacement Winch for Boat Trailer
  The Single Speed Jif Trailer Winch part # 315-W2000D would work great as a replacement for your boat trailer that is carrying a 1998 Searay BR. When picking out a winch for a boat trailer you generally only need a winch with 50 percent of the weight capacity compared to the weight of the boat. So this winch has a 2,000 lb weight capacity and would work great with up to a 4,000 lb boat.
  view full answer...
• Replacement Winch For Stripped Ratchet Gear on # 315-W2000D Winch
  The Single-Speed Boat Trailer Winch with 20' Strap and Brake - 2,000 lbs # 315-W2000D is the replacement winch you would need and is a Jif Marine Winch not Dutton-Lainson. There is not replacement gear kit compatible with your winch. You may want to consider upgrading to the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs # DL14825 which has high carbon steel gears for more durability.
  view full answer...
• Are there Replacement Parts Available for the JIF Marine 2-Speed Boat Trailer Winch
  Unfortunately not, Ron, there are no replacement parts available for the 2-Speed Boat Trailer Winch with 20' Strap # 315-W2000D. So, you'd need to replace the entire winch if you needed to replace the spring.
  view full answer...
• Winch for Use with 2001 205 SSE Chaparral Boat
  I looked up the weight of your 2001 205 SSE Chaparral boat and found it to be right at 3,100 lbs dry which means the Single Speed Jif Winch part # 315-W2000D would work well as it has a 2,000 lb capacity and the typical ratio for picking out a winch based on boat weight is 2:1 meaning you only need a winch with half the capacity of the weight of the boat.
  view full answer...
• Does 2-Speed Boat Trailer Winch 315-W2000D Come With Strap
  Yep, it sure does; the 20 foot strap is indeed included with the 2-Speed Boat Trailer Winch # 315-W2000D.
  view full answer...
• Does Mounting Hardware Come with Jif Marine 2K Single-Speed Boat Trailer Winch
  The Single-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W2000D does not come with mounting hardware. This is basically because there are a wide variety of mounting applications so you'll need to supply your own mounting hardware, which you can acquire at your local hardware or home improvement store.
  view full answer...
• Do You Have Replacement Parts for an Attwood 2000 Boat Trailer Winch?
  Hey Edward. Sorry but we do not have replacement parts for your Attwood 2000 winch. The only solution I would have for you is to replace it with the 2-Speed Boat Trailer Winch with 20' Strap item # 315-W2000D. This winch also has a 2,000 lbs capacity and a 2" x 20' nylon strap.
  view full answer...

Do you have a question about this Trailer Winch?