Replacement Handle for Dutton-Lainson Hand Winch DL1100A

Question

Question:

DL1100A winch. Can you tell me what ratcheting handle I need to replace my standard handle on my dl1100a

asked by: Frank E

0

Expert Reply:

While there is a replacement handle for your Dutton-Lainson Hand Winch # DL15103 (which is model DL1100A), the Replacement Winch Handle # DL5703657, a different handle will not give this winch a ratcheting mechanism.

For that you would need to replace the winch entirely with the Single-Speed Boat Trailer Winch # 315-W1800D which has a ratcheting hand crank. This winch comes with a 20' strap and has an 1,800 lb capacity, though there are other capacities available: 2,000 lbs # 315-W2000D, 2,500 lbs # 315-W2500D, 3,200 lbs # 315-W3200D.

I've added a link to some video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The 3,200 lb 2-Speed Boat Trailer Winch with 20' Strap and Brake #315-W3200D will be sufficient to pull in your 3,190 lb boat if your trailer has rollers on it as that will make your boat easier to move. If you have bunks then it will technically…

view full answer...

Answer 2

The Replacement Handle for Dutton-Lainson Single Speed Hand Winch #DL70305 mounts to the same size shaft that is on the 2-Speed Boat Trailer Winch #315-W3200D. This will give you a 7" long handle like the previous handle you had on your other…

view full answer...

Answer 3

I spoke with my contact at BoatBuckle regarding the difference in break strength between the G2 Ratchet Tie-Downs in Stainless Steel #IMF14256 and the Standard #IMF08893. He said the main reason the stainless steel model has a lower break strength of…

view full answer...

Answer 4

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…

view full answer...

Answer 5

The 2-Speed Boat Trailer Winch with 20' Strap and Brake #315-W3200D does not come with mounting hardware. This is the case with all of our winches.

view full answer...

Answer 6

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. This is a very standard size and bolt pattern so it should fit on your trailer easily. I attached a review video for this for you to check out as…

view full answer...

Answer 7

Hey Patrick, those dimensions don't appear to be anywhere from what I can find. While I can't give you that info, I can say that as long as the bearings fit, and you have a #11 or #12 spindle, then the Dexter Trailer Hub and Drum Assembly…

view full answer...

Replacement Handle for Dutton-Lainson Hand Winch DL1100A

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching