Dimensions of Base of 2,000 lb 2-Speed Boat Trailer Winch with 20' Strap # 315-W2000D

Question

Question:

I am looking for a replacement boat winch My mounting plate is 4inch x 6 inch can go to 7 For your winch 315-W2000D you have two expert replies under the QandA section that contradict each other. One response shows the base dimension of 3 3/4 wide by 6 1/4 long. which would fit The other response on bolt hole spacing gives the base dimension of 5.75inch wide x 7 inch long which would not fit What is the correct base dimension of the winch? Im looking for a two speed winch with strap, to replace a DL1402 single speed winch

asked by: Gary R

0

Expert Reply:

The base dimensions are indeed 6-1/4" long x 3-3/4" wide for the 2-Speed Boat Trailer Winch with 20' Strap - 2,000 lbs # 315-W2000D.

expert reply by: Kyle S

0

Answer 1

The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake item #315-W2000D are 2.5 inches apart center to center. The attachment point to the center bolt is a slot that is 3.5 inches - 5…

view full answer...

Answer 2

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.

view full answer...

Answer 3

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W1800D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide. I have attached a photo of these measurements for you as well. If…

view full answer...

Answer 4

The Single Speed Jif Trailer Winch part #315-W2000D would work great as a replacement for your boat trailer that is carrying a 1998 Searay BR. When picking out a winch for a boat trailer you generally only need a winch with 50 percent of the weight…

view full answer...

Answer 5

Hey Chris, thanks for reaching out, and nice boat! Based on what you are describing, I'd go with the bunk-style guide-ons. Since you usually aren't power loading, the bunks will help catch the hull and keep it centered. Plus, the bunks help…

view full answer...

Answer 6

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

view full answer...

Answer 7

The BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps #IMF17631 referenced in your question feature an overall length of 2 feet, which is measured from the inside of one hook to the inside of the other. There may be an inch or so tolerance but…

view full answer...

Answer 8

Hey William, thanks for reaching out! I recommend replacing your Shelby Boat Winch Model 5407B with the Dutton-Lainson Hand Winch #DL14627 which is rated for 1,800 lbs and according to our research we've found this winch mounting pattern to match…

view full answer...

Answer 9

I checked with Fulton and the Fulton XLT, 2-Speed Trailer Winch - 3,200 lbs Item #F142425 is made by our neighbors to the south, Mexico. If you are looking for a winch that is made in the USA I recommend Dutton-Lainson Hand Winch with TUFFPLATE…

view full answer...

Answer 10

From what I have found, the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs #DL14627 will match the bolt pattern of your Shelby 5407B. I have attached a diagram as well as the dimensional drawing showing the bolt pattern on…

view full answer...

Dimensions of Base of 2,000 lb 2-Speed Boat Trailer Winch with 20' Strap # 315-W2000D

Continue Researching