Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 part number: Y00421
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit
Aerodynamic, teardrop shape helps to create a quiet roof rack system
Controls air flow to significantly reduce wind noise and vibration
Reduces drag to help maintain your fuel efficiency
Full-length crossbars maximize space for clamp-on carriers and accessories
Accommodate most universal-mount bike, water, snow, and cargo carriers
Easy installation on Yakima towers with included brackets and hardware
Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers
Roll-formed, galvanized steel bars are extremely strong and durable
Black vinyl coating protects the bars from corrosion
Plastic endcaps help to keep water and debris out of bars
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 220 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 50" long x 2-3/4" wide x 1" tall
Limited lifetime warranty
The aerodynamic Yakima CoreBars let you build a quiet yet heavy-duty roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. The bars are constructed of galvanized steel so they can carry more weight than traditional aluminum aero bars. And they're coated in black vinyl to help prevent corrosion.
Aerodynamic Design
The CoreBar's teardrop shape controls air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This lessens the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Heavy-Duty Steel Construction
The Yakima CoreBar is constructed of roll-formed, galvanized steel. This heavy-duty steel construction enables the CoreBars to carry significantly more weight than traditional aluminum aero bars (up to 220 lbs depending on the weight capacity of your roof). The bars are also coated in black vinyl to protect them from corrosion.
Hassle-Free Installation
The CoreBars install on any of Yakima's StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine - with included brackets. Just remove the endcaps, slide the brackets onto the bars, and replace the endcaps. Then place the bars on your towers with the brackets seated in the tower BarBeds. Use the torque tool included with the towers to tighten the bars in place.
Maximum Cargo Carrying Capacity
The full-length CoreBar extends past your towers to provide more space for mounting carriers and accessories on your roof. The CoreBar is also compatible with most universal, clamp-on carriers and accessories.
8000421 Yakima Core Bar Cross Bars - Steel - Aero Profile - 50" Long - Qty 2
Item # Y00421
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06123
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006123 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06170
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006170 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06123
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06170
Average Customer Rating: 4.8 out of 5 stars (2134 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Cody05/25/2023
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!1586533
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.1691344
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.329453
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation1757391
by: Lisa04/12/2019
Honda Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water. 625642
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.844973
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.844974
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!501204
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.517728
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done! 830131
etrailer's selection process, delivery ann installation help both online and on the phone was excellent1679540
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Steve30001/14/2023
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.1499866
by: Alfredo07/25/2022
THERE'S A PIECE MISSING, A rubber cap on 1 of the crossbars1337690
by: Emma S.06/27/2020
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.837238
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked. 580576
Yakima's Core Bar roof rack crossbars # Y00421 can be cut to a specific length so long as you can make clean square cuts to allow re-installation of the bar end caps. You will probably also need to file the cuts to make them smooth and safe for handling.
The Yakima roof racks confirmed to fit your 2018 Toyota RAV4 are shown on the page I linked for you. These racks use bar lengths of 48 or 50-inches. view full answer...
As long as your 2016 Ford F-150 is a Super or Super Crew cab, you can certainly use a Yakima CoreBar roof rack.
The rack would consist of these parts:
• Yakima 60 inch CoreBar crossbars, part # Y00422
• Yakima BaseLine Towers, part # Y28TR
• Yakima BaseClip fit kit, part # Y06122
You could install the crossbars on the 2015 Forester, but you'd need different roof rack towers. You'd want to use the # Y33TR Yakima TimberLine towers. This would allow you to use the crossbars with view full answer...
The Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards. view full answer...
It sounds like you have the Yakima CoreBars like the # Y00421 with Skyline towers. We do have the replacement "strap" that allows you to attach the CoreBars to the Skyline towers.
That is the Replacement Adapter and Seat for Yakima CoreBar Crossbars # 8880639. view full answer...
I spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof.
With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233.
This system will work with your bare roof, has a maximum view full answer...
I do have a roof rack option for you, however Thule does not currently make a roof rack system for your 2016 Ford Edge with existing naked roof.
In order to attach a roof rack to your vehicle you may want to consider the Yakima CoreBar Crossbars Roof Rack park # Y00421, # Y28TR, # Y06102, and # Y06139. It has an aero style crossbar setup to ensure a quiet ride.
I have attached an installation video for you. view full answer...
We do have a large selection of roof-mounted bike racks that will work perfectly on the flat aero-style Yakima Core Bar crossbars like # Y00421 that you have on your Land Rover. I recommend taking a look at the Thule ProRide XT # TH598004. This carrier will actually secure your bike by the frame so you don't have to take off the front wheel and it has a weight capacity of 44 pounds. A bike lock is also included to help protect your investment.
I have attached a short video demonstration view full answer...
There are 2 different clip sets recommended for the 2016 Ford Edge with a Naked Roof because one set of clips is needed for the front while a different set is needed for the rear bar. For the 2016 Edge, the BaseClip 102 # Y06102 will be used to secure the front BaseLine Towers # Y28TR and the BaseClip 139 # Y06139 is needed to secure the rear BaseLine Towers. Yakima lists different clip kits for the front and rear towers in order to achieve a more custom fit for the curve of the vehicle's view full answer...
If you have a roof rack system on your Outback and is not the Sport model, the roof rack I recommend is the Yakima CoreBar roof rack. You would need to remove your roof rack and use the fixed mounting points on your roof.
The 50-inch aero-style crossbars design helps reduce wind noise and drag and helps keep the roof rack quieter. For this roof rack you will need part # Y00421, part # Y53TR, and part # Y00241. For longer crossbars, you can take a look at part # Y00422 for 60-inch, and view full answer...
To my surprise, Thule does not offer a fit kit for your 2018 Chevrolet Cruze. Therefore, there would be no way to safely use the Thule AeroBlade Roof Rack you have now. The Thule Roof Rack Fit Kit for Traverse Foot Packs part 1569 that you referenced is only for a Chevrolet Cruze from 2011 - 2016 and Thule no longer makes the fit kits for that rack.
I know this is not what you were hoping to hear but you best option is to sell the system you have now and then put that towards a new view full answer...
We have a Yakima roof rack that is confirmed as a fit for your 2017 Ford Edge with a panoramic glass roof, but I checked with Thule and they stopped making the fit kit that was designed for your vehicle configuration.
The Yakima parts you would need are part # Y00421, # Y28TR, # Y06102, and # Y06139. This will give you a roof rack with aero shaped bars that will be better on fuel mileage and wind noise. The install video link I attaches shows this rack installed on an Edge very similar view full answer...
For your 2019 Honda Accord the Yakima Corebar roof rack part numbers # Y00421, # Y28TR, # Y06123, and # Y06159 is the roof rack I recommend. This rack gives you a rack with aerodynamically shaped crossbars which means you'll have a quieter ride with minimal affected fuel mileage as well. This rack is also easy to install and has plenty of capacity at 220 lbs. view full answer...
We can offer you several options in an ultra-quiet aerodynamic type roof rack system for your 2014 Toyota Avalon Hybrid with a sun roof. You can choose from racks whose shorter bars terminate in the foot assemblies, for a cleaner more-OEM look, or you can select a rack with longer aero bars that extend through the feet to provide a larger surface for loading your cargo. Available bar lengths range from 42- to 54-inches. All options are shown on the linked page.
The system I like for view full answer...
Yakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set. view full answer...
By 'gap', I'm assuming you're meaning the T-slot or groove in the top of the crossbar that allows certain roof rack accessories to install, rather than clamping around the crossbar, is that correct?
If that's the case, I'd recommend a Yakima JetStream roof rack, which would be assembled from the following parts:
• Yakima JetStream 50 inch crossbars in silver as part # Y00425 for black
• Yakima BaseLine towers, part # Y28TR
• Vehicle Specific fit clips # Y06123
• Vehicle Specific view full answer...
I checked with Yakima and the Baseline rack part numbers # Y00421, # Y28TR, # Y06102, and # Y06139 that you referenced is a confirmed fit for the 2016 Ford Edge with a Panoramic Vista Roof. I attached a couple pictures that I got from their fit guide that shows that the smaller feet fit perfectly on the top of the metal of the roof and that is how they are able to fit the rack. view full answer...
I can understand wanting to have a larger spread between the crossbars, especially if you're carrying things like canoes and kayaks and don't want to have large amounts of the boats hanging off of either end of the bars. The issue isn't so much the roof rack kits like the # Y53TR with # Y00241 and # Y00421 , as it is the mounting points available on your 2017 Subaru Outback. The Yakima roof rack kit mentioned above has the largest recommended spread of any of the crossbars that we offer- view full answer...
For your 2002 Honda Civic, I recommend using the Yakima CoreBar Crossbar System composed of part # Y00421, part # Y28TR, part # Y06162, and part # Y06159. The Yakima CoreBars offer a sleek and aerodynamic look which will reduce wind noise and prevent drag. The BaseLine towers are contoured to the roof of your vehicle and can be adjusted to provide a level crossbar surface.
For a bike rack that will work well with the above crossbars, I recommend the Yakima HighRoad Roof Bike Rack part view full answer...
The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek.
The roof rack for your '20 Escape is made up of:
- Yakima JetStream Crossbars # Y00426 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152
- Same Key System Lock Cores (Optional) # Y07204
The aero shape view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
The Yakima Baseline towers # Y28TR with the landing pad 19 will leave you about 5-1/4 inches from the top of your bar to the roof of your 2020 Honda CR-V. That being said the Yakima Showdown # Y04081 will sit about 9 inches up from the top of your bar when the kayaks are not loaded. view full answer...
Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers # Y00425, # Y28TR, # Y06159, # Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs down the top of it for roof accessories that have channel attachment options. view full answer...
It looks like the 2007 Buick LaCrosse uses the Yakima BaseLine Towers.
For every Yakima crossbar set that is compatible with this LaCrosse, the towers are part # Y28TR, and the fit kit is the BaseClip Fit Kit, part # Y06170.
These are the only parts you need for the JetStream Crossbars and the CoreBar Crossbars. If you have the Round Crossbars, you will also need the RoundBar SL Adapter, part # Y03536. If you have the HD Crossbars, you will also need the HD Bar SL Adapter, part # view full answer...
We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146.
This will give you a complete view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've view full answer...
The BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, # Y28TR, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, # Y06102, and the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, # Y00425, make up the roof rack system I recommend for your 2017 Ford Edge with no existing rails or crossbars.
According to the Ford owners manual for this vehicle, this rack is limited to the factory specs for load capacity of 45 kg or 99.2 lbs.
I've attached view full answer...
There are many different parts that are needed for various vehicles, so it is difficult to piece together complete package kits for each and every vehicle on the road which is why you sometimes see a few parts that are required for a complete roof rack. If you go into our vehicle fit guide and enter in all of your vehicle's information, you should be able to see every part that is required for each roof rack system.
It looks like you were checking out the BaseLine Towers # Y28TR. These view full answer...
Yes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409. view full answer...
The Q150 clips part # Y00750 would be the correct clips to use on your 2015 Ford F-150 to use with a Control Tower roof rack but they have been discontinued. It sounds like you have a Yakima round bar roof rack though so I can help you piece together a few more parts to complete the rack on your truck.
You would need the BaseLine Towers part # Y28TR, the Round Bar Adapter # Y03536 and then 2 sets of the fit kit part # Y06122. With the 58 inch round bars part # Y00409 that you already view full answer...
The best option for a roof rack on the 2019 Toyota Prius is the Yakima JetStream Crossbars part # Y00425 with the fit kit part # Y06123, part # Y06169 and BaseLine Towers for Yakima Crossbars part # Y28TR. The BaseLine towers are the best option as far as fit goes on the Prius because you can adjust the pitch of the tower to get the roof rack level even on the curved roof of the Prius which is an issue that many Prius owner's have run into in the past. The Yakima bars are also aerodynamic view full answer...
We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408.
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06137
BaseClip Fit Kit # Y06127
view full answer...
While we have a way for you to use Yakima round crossbars on a 2019 Ram 3500, it will need to be as a roof rack application, and the reason for that is the BAK Vortrak Hard Tonneau Cover slightly covers the stake pockets of your '19 Ram 3500 and there is no way to add a rack system over the tonneau without interference.
There is also not a way to attach those crossbars to the bed of your truck, but what you can do instead, so long as your 2019 Ram 3500 is a Crew Cab or Mega Cab is use view full answer...
Since the rack he has is for raised rails and the crossbars are only 38" in length you wouldn't be able to use any of the components and would need a completely new rack. A 2002 Toyota 4Runner has a minimum bar length of 48" so for a round bar setup on a naked roof you would need the following components:
Yakima RoundBar Crossbars # Y00408
BaseLine Towers for Yakima Crossbars # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171
If view full answer...
To fit any current generation Yakima system to a 2015 Toyota RAV4, you'll need the following kit:
4 pack Yakima BaseLine Towers for Yakima crossbars, part # Y28TR
Yakima Base Clip 180, part # Y06180
Yakima Base Clip 169, part # Y06169
You may also need the SL Round Bar adapters, part # Y03536 if you have round bars.
There is not a Q-Tower kit available for this vehicle. view full answer...
I reached out to my tech contact at Yakima to see if your 2007 Nissan Sentra has the Q-clips you were seeking. Unfortunately, he said they don't have a Q-clip fit and the baseline towers are your only option for a Yakima roof rack.
For that system you will need:
Yakima JetStream Crossbars - 50" Long # Y00425
BaseLine Towers for Yakima Crossbars # Y28TR
BaseClip Fit Kit # Y06142
Yakima Same Key System (SKS) Lock Cores # Y07204 (optional) view full answer...
I have a solution for you to install Yakima round crossbars on your 2013 Mazda CX-3 however, there are no Q Clips or Q Towers designed to fit.
Instead you will want to use the BaseLine Towers # Y28TR with the RoundBar Adapters # Y03536. Then for the fit kit you'll use the BaseClips # Y06130 and # Y06132. Two of each BaseClip is needed.
Yakima recommends 48 inch Round Crossbars # Y00408 for the CX-3. view full answer...
The Yakima BaseClip Fit Kit # Y06123 is for the front and the Yakima BaseClip Fit Kit # Y06170 is for the rear. Then you can install your Yakima BaseLine Towers Y00146 and then whatever Yakima crossbars you have. view full answer...
I do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536.
I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round view full answer...
If you are referring to the Yakima Round Bar Roof Rack then yes, you can transfer it from the 2005 Toyota Prius to your 2017 Toyota Prius Prime but you will need a new fit kit as they are different for each vehicle. The fit kit is the part or rather clips that attach inside the door jamb and secure the feet to the roof. Therefore, the only things you will need to reuse your Yakima Round Bar Roof Rack is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06123 and part # Y06169.
Please view full answer...
We do have a roof rack that fits your 2019 Kia Sorento with a naked roof, the Yakima roof rack that consists of part # Y28TR, # Y06159, # Y06170, and # Y00425.
This will give you a very easy to install and aerodynamic roof rack confirmed as a fit. view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.